SR2400PP Intel, SR2400PP Datasheet - Page 84

• Manufacturer Part Number: SR2400PP
• Manufacturer: Intel

Specifications of SR2400PP

• Lead Free Status / Rohs Status: Supplier Unconfirmed

System BIOS
4.3.5.5
System Management
Serial Console Features
Event Log configuration
Assert NMI on SERR
Assert NMI on PERR
Resume on AC Power Loss
FRB-2 Policy
Late POST Timeout
Hard Disk OS Boot Timeout
PXE OS Boot Timeout
84
Feature
Server Menu
N/A
N/A
N/A
Disabled
Enabled
Disabled
Enabled
Stays Off
Power On
Last State
Disable BSP
Do not disable BSP
Retry on Next Boot
Disable FRB2 Timer
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
Table 41. BIOS Setup, Server Menu Selections
Options
Intel order number C91056-002
N/A
N/A
Configures event logging.
If enabled, NMI is generated on
SERR and logged.
If enabled, NMI is generated.
SERR option needs to be
enabled to activate this option.
Determines the mode of
operation if a power loss occurs.
Stays off, the system will remain
off once power is restored. Power
On, boots the system after power
is restored.
This controls action if the boot
processor will be disabled or not.
This controls the time limit for
add-in card detection. The system
is reset on timeout.
This controls the time limit
allowed for booting an operating
system from a Hard disk drive.
The action taken on timeout is
determined by the OS Watchdog
Timer policy setting.
This controls the time limit
allowed for booting an operating
system using PXE boot. The
action taken on timeout is
determined by OS Watchdog
Timer policy setting.
Help Text
Intel® Server Board SE7320VP2
Selects submenu.
Selects submenu.
Selects submenu.
Grayed out if “NMI on
SERR” is disabled.
“Last State” is only
displayed if the Intel
Management Module is
present. When displayed,
“Last State” is the
default.
When set to “Stays Off,”
“Power Switch Inhibit” is
disabled. The Intel
Management Module is
not supported on the
Server Board
SE7320VP2.
“Disable BSP” and “Do
not disable BSP” are only
displayed if the Intel
Management Module is
present. The Intel
Management Module is
not supported on the
Server Board
SE7320VP2.
Description
Revision 2.1