PIC24HJ32GP202-I/SO Microchip Technology Inc., PIC24HJ32GP202-I/SO Datasheet - Page 156

• Manufacturer Part Number: PIC24HJ32GP202-I/SO
• Description: 16-BIT MCU, 28LD, 32KB FLASH, 40 MIPS, NANOWATT
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24HJ32GP202-I/SO

• A/d Inputs: 10 Channel, 12-Bit
• Cpu Speed: 40 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 21
• Interface: I2C/SPI/UART
• Memory Type: Flash
• Number Of Bits: 16
• Package Type: 28-pin SOIC
• Programmable Memory: 32K Bytes
• Ram Size: 2K Bytes
• Timers: 3-16-bit, 1-32-bit
• Voltage, Range: 3-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC24HJ32GP202/204 and PIC24HJ16GP304
REGISTER 16-1:
DS70289A-page 154
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9-8
bit 7
bit 6
bit 5
bit 4
Note 1:
R/W-0 HC
UARTEN
WAKE
R/W-0
This feature is only available for the 16x BRG mode (BRGH = 0).
UARTEN: UARTx Enable bit
1 = UARTx is enabled; all UARTx pins are controlled by UARTx as defined by UEN<1:0>
0 = UARTx is disabled; all UARTx pins are controlled by port latches; UARTx power consumption
Unimplemented: Read as ‘0’
USIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
IREN: IrDA Encoder and Decoder Enable bit
1 = IrDA encoder and decoder enabled
0 = IrDA encoder and decoder disabled
RTSMD: Mode Selection for UxRTS Pin bit
1 = UxRTS pin in Simplex mode
0 = UxRTS pin in Flow Control mode
Unimplemented: Read as ‘0’
UEN<1:0>: UARTx Enable bits
11 = UxTX, UxRX and BCLK pins are enabled and used; UxCTS pin controlled by port latches
10 = UxTX, UxRX, UxCTS and UxRTS pins are enabled and used
01 = UxTX, UxRX and UxRTS pins are enabled and used; UxCTS pin controlled by port latches
00 = UxTX and UxRX pins are enabled and used; UxCTS and UxRTS/BCLK pins controlled by
WAKE: Wake-up on Start bit Detect During Sleep Mode Enable bit
1 = UARTx will continue to sample the UxRX pin; interrupt generated on falling edge; bit cleared
0 = No wake-up enabled
LPBACK: UARTx Loopback Mode Select bit
1 = Enable Loopback mode
0 = Loopback mode is disabled
ABAUD: Auto-Baud Enable bit
1 = Enable baud rate measurement on the next character – requires reception of a Sync field (55h)
0 = Baud rate measurement disabled or completed
URXINV: Receive Polarity Inversion bit
1 = UxRX Idle state is ‘0’
0 = UxRX Idle state is ‘1’
LPBACK
R/W-0
minimal
in hardware on following rising edge
before other data; cleared in hardware upon completion
U-0
port latches
—
UxMODE: UART
HC = Hardware cleared
W = Writable bit
‘1’ = Bit is set
R/W-0 HC
ABAUD
USIDL
R/W-0
x
MODE REGISTER
URXINV
IREN
R/W-0
R/W-0
Preliminary
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
(1)
RTSMD
BRGH
R/W-0
R/W-0
R/W-0
U-0
—
PDSEL<1:0>
© 2007 Microchip Technology Inc.
x = Bit is unknown
R/W-0
R/W-0
UEN<1:0>
STSEL
R/W-0
R/W-0
bit 8
bit 0