PIC24HJ32GP202-I/SO Microchip Technology Inc., PIC24HJ32GP202-I/SO Datasheet - Page 166

• Manufacturer Part Number: PIC24HJ32GP202-I/SO
• Description: 16-BIT MCU, 28LD, 32KB FLASH, 40 MIPS, NANOWATT
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24HJ32GP202-I/SO

• A/d Inputs: 10 Channel, 12-Bit
• Cpu Speed: 40 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 21
• Interface: I2C/SPI/UART
• Memory Type: Flash
• Number Of Bits: 16
• Package Type: 28-pin SOIC
• Programmable Memory: 32K Bytes
• Ram Size: 2K Bytes
• Timers: 3-16-bit, 1-32-bit
• Voltage, Range: 3-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC24HJ32GP202/204 and PIC24HJ16GP304
REGISTER 17-1:
DS70289A-page 164
bit 2
bit 1
bit 0
ASAM: ADC Sample Auto-Start bit
1 = Sampling begins immediately after last conversion. SAMP bit is auto-set.
0 = Sampling begins when SAMP bit is set
SAMP: ADC Sample Enable bit
1 = ADC sample-and-hold amplifiers are sampling
0 = ADC sample-and-hold amplifiers are holding
If ASAM = 0, software can write ‘1’ to begin sampling. Automatically set by hardware if ASAM = 1.
If SSRC = 000, software can write ‘0’ to end sampling and start conversion. If SSRC ≠ 000,
automatically cleared by hardware to end sampling and start conversion.
DONE: ADC Conversion Status bit
1 = ADC conversion cycle is completed
0 = ADC conversion not started or in progress
Automatically set by hardware when ADC conversion is complete. Software can write ‘0’ to clear
DONE status (software not allowed to write ‘1’). Clearing this bit will NOT affect any operation in
progress. Automatically cleared by hardware at start of a new conversion.
AD1CON1: ADC1 CONTROL REGISTER 1 (CONTINUED)
Preliminary
© 2007 Microchip Technology Inc.