W83627UHG Nuvoton Technology Corporation of America, W83627UHG Datasheet - Page 100

• Manufacturer Part Number: W83627UHG
• Description: IC I/O CONTROLLER 128-QFP
• Manufacturer: Nuvoton Technology Corporation of America

Specifications of W83627UHG

• Applications: PC's, PDA's
• Interface: LPC
• Voltage - Supply: 3.3V, 5V
• Package / Case: 128-XFQFN
• Mounting Type: Surface Mount
• Pin Count: 128
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

An overrun or underrun terminates the current command and data transfer. Disk writes complete the
current sector by generating a 00 pattern and valid CRC. Reads require the host to remove the
remaining data so that the result phase may be entered.
DMA transfers are enabled by the specify command and are initiated by the FDC when the LDRQ pin
is activated during a data transfer command.
9.2
The function of the data separator is to lock onto incoming serial read data. When a lock is achieved,
the serial front-end logic in the chip is provided with a clock that is synchronized with the read data.
The synchronized clock, called the Data Window, is used to internally sample the serial data portion of
the bit cell, and the alternate state samples the clock portion. Serial-to-parallel conversion logic
separates the read data into clock and data bytes.
The Digital Data Separator (DDS) has three parts: control logic, error adjustment, and speed tracking.
The control logic generates RDD and RWD for every pulse input, and any data pulse input is
synchronized and then adjusted immediately by error adjustment. A digital integrator keeps track of
the speed changes in the input data stream.
9.2.1
The write precompensation logic minimizes bit shifts in the RDDATA stream from the disk drive.
Shifting of bits is a known phenomenon in magnetic media and depends on the disk media and the
floppy drive.
The FDC monitors the bit stream that is being sent to the drive. The data patterns that require
precompensation are well known, so, depending on the pattern, the bit is shifted either early or late,
relative to the surrounding bits.
9.2.2
The FDC is also capable of interfacing directly to perpendicular recording floppy drives. Perpendicular
recording differs from the traditional longitudinal method in that the magnetic bits are oriented vertically.
This scheme packs more data bits into the same area.
FDCs with perpendicular recording drives can read standard 3.5" floppy disks and can read and write
perpendicular media. Some manufacturers offer drives that can read and write standard and
perpendicular media in a perpendicular media drive.
A single command puts the FDC into perpendicular mode. All other commands operate as they
normally do. Perpendicular mode requires a 1 Mbps data rate for the FDC, and, at this data rate, the
FIFO manages the host interface bottleneck due to the high speed of data transfer to and from the
disk.
Data Separator
Write Precompensation
Perpendicular Recording Mode
-89-
Publication Release Date: May 25, 2007
W83627UHG
Revision 1.0