TXC-06101AILQ Transwitch Corporation, TXC-06101AILQ Datasheet - Page 79

• Manufacturer Part Number: TXC-06101AILQ
• Manufacturer: Transwitch Corporation

Specifications of TXC-06101AILQ

• Operating Temperature (min): -40C
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Package Type: PQFP
• Rad Hardened: No
• Lead Free Status / Rohs Status: Not Compliant

Address [H]
075 - 07F
0C5-0C7
080-0BF
070-072
0CA
0CB
0C0
0C1
0C2
0C3
0C4
0C8
0C9
06F
073
and
074
Proprietary TranSwitch Corporation Information for use Solely by its Customers
Status Bits
RRDI-PSD
RRDI-PCD
RRDI-PPD
C2UNEQ
RRDI-P
RPDI-P
C2MIS
RLOM
Control Bits
PRDISEL
J0RWEN
J0SYNC
RPATH
RPATH
RPATH
RPATH
J0EN0
J0EN1
H4INT
H4INT
Reserved: Reserved for future use
Internal Use - Do Not Access
Reserved: Reserved for future use
NOT EQUIPPED
Rx Line J0/J1: Line or Path Trace Bytes - Multiple byte J0 messages
and the J1 Bytes are accessed at these locations. These locations are
only used for J0 Messages if J0EN1 = "1". If J1SYNCEN = "1" or
J0EN(1,0) = "11" the byte immediately following an ASCII <CR> and
<LF>, of the appropriate message, will be stored in Location 080[H]. The
Rx Line J1 Bytes are always output at the Rx Terminal Port. These Bytes
are also available at the Rx POH Port.
Rx Line B3: Path BIP-8 Parity Byte - The Parity Calculation is even par-
ity over all SPE Bytes (the 27 TOH Bytes are excluded). Parity Errors are
accumulated by the Rx B3 Error Counter. Additional processing is per-
formed to develop an Excess B3 BER Alarm. These Bytes are also
available at the Rx POH Port.
Rx Line C2: Path Signal Label Byte - This byte is debounced and stored
in Location 0D1[H]. Additional processing is performed to develop Mis-
match, Unequipped, and Path Defect Indications. This byte is also avail-
able at the Rx POH Port.
Rx Line G1: Path Status Byte - Bits 1-4 (Transmission Convention) are
processed for FEBE-P information and the Errors are accumulated by
the FEBE-P Counter. Bits 5, 6 and 7, (Transmission Convention) are pro-
cessed as the RDI-P Alarm, either for Single Bit RDI-P or for Three Bit
RDI-P applications. This byte is also available at the Rx POH Port.
Rx Line F2: Path User Channel Byte - This byte is debounced and
stored in Location 0D3[H]. This byte is also available at the Rx POH
Port.
Rx Line H4: Multiframe Indicator Byte - Bits 7 and 8 (Transmission Con-
vention) are optionally used to synchronize an internal, 2-Bit, Modulo 4,
Rx Multiframe Counter for VT structured payloads. Bits 1-6 (Transmis-
sion Convention) are not processed. This byte is also available at the Rx
POH Port.
Rx Line (Z3, Z4 and Z5): 3
are debounced and stored in Locations 0D5[H], 0D6[H], and 0D7[H],
respectively. These Bytes are also available at the Rx POH Port. OC5[H]
= Z3 and 0C7[H] = Z5.
Rx Insert B3: internally generated B3 value multiplexed into Rx Terminal
Port Data if insertion option is enabled. The Parity Calculation is even
parity over all SPE Bytes (the 27 TOH Bytes are excluded).
Rx Insert C2: byte to be multiplexed into Rx Terminal Port Data if inser-
tion option is enabled
Rx Insert G1: byte to be multiplexed into Rx Terminal Port Data if inser-
tion option is enabled
Rx Insert F2: byte to be multiplexed into Rx Terminal Port Data if inser-
tion option is enabled
- 79 of 196 -
DATA SHEET
RD
, 4
Description
TH
and 5
TH
Growth Bytes - These bytes
TXC-06101
Ed. 3, April 2001
TXC-06101-MB
PHAST-1