ep3c120f780c8nes Altera Corporation, ep3c120f780c8nes Datasheet - Page 202

• Manufacturer Part Number: ep3c120f780c8nes
• Description: Cyclone Iii Device Family
• Manufacturer: Altera Corporation

High-Speed Differential Interfaces in Cyclone III Devices
Figure 8–10. RSDS Interface with Single Resistor Network on the Top and Bottom I/O Banks
Note to
(1)
8–12
Cyclone III Device Handbook, Volume 1
The
Figure
R
P
value is pending device characterization.
Cyclone III Device
RSDS Transmitter
8–10:
Non-Dedicated
f
mini-LVDS I/O Standard Support in Cyclone III Devices
The mini-LVDS specification defines its use in chip-to-chip applications
between the timing controller and the column drivers on display panels.
Cyclone III devices meet the Texas Instruments mini-LVDS Interface
Specification and support the mini-LVDS output standard. All of the
Cyclone III device I/O banks support the mini-LVDS output standard.
The left and right I/O banks support dedicated mini-LVDS transmitters
which are able to run at up to 400 Mbps. On the top and bottom I/O
banks, the mini-LVDS transmitters are supported using external resistors.
The performance target is pending device characterization. The
mini-LVDS standard does not require an input reference voltage;
however, it does require a 100-Ω termination resistor between the two
signals at the input buffer.
See the Cyclone III Device Datasheet: DC and Switching Characteristics of
Cyclone III Devices chapter in volume 2 of the Cyclone III Device Handbook
for the mini-LVDS I/O standard electrical specifications.
Single Resistor Network
R P
50 Ω
50 Ω
100 Ω
Altera Corporation-Preliminary
RSDS Receiver
March 2007