PIC18F13K50-E/P MICROCHIP [Microchip Technology], PIC18F13K50-E/P Datasheet - Page 8

no-image

PIC18F13K50-E/P

Manufacturer Part Number
PIC18F13K50-E/P
Description
Manufacturer
MICROCHIP [Microchip Technology]
Datasheet
PIC18F1XK50/PIC18LF1XK50
1.2
• Memory Endurance: The Flash cells for both
• Self-programmability: These devices can write
• Extended Instruction Set: The PIC18F1XK50/
• Enhanced CCP module: In PWM mode, this
• Enhanced Addressable USART: This serial
• 10-bit A/D Converter: This module incorporates
• Extended Watchdog Timer (WDT): This
DS41350C-page 6
program memory and data EEPROM are rated to
last for many thousands of erase/write cycles – up to
1K for program memory and 100K for EEPROM.
Data retention without refresh is conservatively
estimated to be greater than 40 years.
to their own program memory spaces under
internal software control. Using a bootloader
routine located in the code protected Boot Block,
it is possible to create an application that can
update itself in the field.
PIC18LF1XK50 family introduces an optional
extension to the PIC18 instruction set, which adds
8 new instructions and an Indexed Addressing
mode. This extension has been specifically
designed to optimize re-entrant application code
originally developed in high-level languages, such
as C.
module provides 1, 2 or 4 modulated outputs for
controlling half-bridge and full-bridge drivers.
Other features include:
- Auto-Shutdown, for disabling PWM outputs
- Auto-Restart, to reactivate outputs once the
- Output steering to selectively enable one or
communication module is capable of standard
RS-232 operation and provides support for the LIN
bus protocol. Other enhancements include
automatic baud rate detection and a 16-bit Baud
Rate Generator for improved resolution.
programmable acquisition time, allowing for a
channel to be selected and a conversion to be
initiated without waiting for a sampling period and
thus, reduce code overhead.
enhanced version incorporates a 16-bit
postscaler, allowing an extended time-out range
that is stable across operating voltage and
temperature. See Section 27.0 “Electrical
Specifications” for time-out periods.
on interrupt or other select conditions
condition has cleared
more of 4 outputs to provide the PWM signal.
Other Special Features
Preliminary
1.3
Devices in the PIC18F1XK50/PIC18LF1XK50 family
are available in 20-pin packages. Block diagrams for
the two groups are shown in Figure 1-1.
The devices are differentiated from each other in the
following ways:
1.
2.
All other features for devices in this family are identical.
These are summarized in Table 1-1.
The pinouts for all devices are listed in Table 1 and I/O
description are in Table 1-2.
Flash program memory:
• 8 Kbytes for PIC18F13K50/PIC18LF13K50
• 16 Kbytes for PIC18F14K50/PIC18LF14K50
On-chip 3.2V LDO regulator for PIC18F13K50
and PIC18F14K50.
Details on Individual Family
Members
© 2009 Microchip Technology Inc.

Related parts for PIC18F13K50-E/P