HD64F3337YCP16 Renesas Electronics America, HD64F3337YCP16 Datasheet - Page 103

• Manufacturer Part Number: HD64F3337YCP16
• Description: IC H8 MCU FLASH 60K 84PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• Package: 84PLCC
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 74
• Interface Type: HIF/I2C/SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

4.1
The H8/3337 Series and H8/3397 Series recognize two kinds of exceptions: interrupts and the
reset. Table 4.1 indicates their priority and the timing of their hardware exception-handling
sequence.
Table 4.1
Priority
High
Low
Note: * Not detected after ANDC, ORC, XORC, and LDC instructions.
4.2
4.2.1
A reset has the highest exception-handling priority. When the RES pin goes low or when there is a
watchdog timer reset (when the reset option is selected for watchdog timer overflow), all current
processing stops and the chip enters the reset state. The internal state of the CPU and the registers
of the on-chip supporting modules are initialized. The reset exception-handling sequence starts
when RES returns from low to high, or at the end of a watchdog reset pulse.
4.2.2
The reset state begins when RES goes low or a watchdog reset is generated. To ensure correct
resetting, at power-on the RES pin should be held low for at least 20 ms. In a reset during
operation, the RES pin should be held low for at least 10 system clock cycles. The watchdog reset
pulse width is always 518 system clocks. For the pin states during a reset, see appendix D, Port
States in Each Mode.
Overview
Reset
Overview
Reset Sequence
Type of
Exception
Reset
Interrupt
Hardware Exception-Handling Sequences and Priority
Section 4 Exception Handling
Detection
Timing
Synchronized
with clock
End of instruction
execution*
Timing of Exception-Handling Sequence
The hardware exception-handling sequence begins
as soon as RES changes from low to high.
When an interrupt is requested, the hardware
exception-handling sequence begins at the end of
the current instruction, or at the end of the current
hardware exception-handling sequence.
71