HD64F3337YCP16 Renesas Electronics America, HD64F3337YCP16 Datasheet - Page 271

• Manufacturer Part Number: HD64F3337YCP16
• Description: IC H8 MCU FLASH 60K 84PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• Package: 84PLCC
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 74
• Interface Type: HIF/I2C/SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit 5—Parity Enable (PE): This bit selects whether to add a parity bit in asynchronous mode.
It is ignored in synchronous mode, and when a multiprocessor format is used.
Bit 5: PE
0
1
Bit 4—Parity Mode (O/E): In asynchronous mode, when parity is enabled (PE = 1), this bit
selects even or odd parity.
Even parity means that a parity bit is added to the data bits for each character to make the total
number of 1’s even. Odd parity means that the total number of 1’s is made odd.
This bit is ignored when PE = 0, or when a multiprocessor format is used. It is also ignored in
synchronous mode.
Bit 4: O/E
0
1
Bit 3—Stop Bit Length (STOP): This bit selects the number of stop bits. It is ignored in
synchronous mode.
Bit 3: STOP
0
1
Description
Transmit: No parity bit is added.
Receive: Parity is not checked.
Transmit: A parity bit is added.
Receive: Parity is checked.
Description
Even parity
Odd parity
Description
One stop bit
Transmit: One stop bit is added.
Receive: One stop bit is checked to detect framing errors.
Two stop bits
Transmit: Two stop bits are added.
Receive: The first stop bit is checked to detect framing errors. If the second
stop bit is a space (0), it is regarded as the next start bit.
(Initial value)
(Initial value)
(Initial value)
239