PEB2255H-V13 Infineon Technologies, PEB2255H-V13 Datasheet - Page 216

• Manufacturer Part Number: PEB2255H-V13
• Description: IC INTERFACE LINE 80-MQFP
• Manufacturer: Infineon Technologies

Specifications of PEB2255H-V13

• Applications: *
• Interface: *
• Voltage - Supply: *
• Package / Case: 80-SQFP
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PEB2255H-V13; PEB2255H-V13IN

Pulse Count Detection Register (Read/Write)
Value after RESET: 00
PCD7…0…
Pulse Count Recovery (Read/Write)
Value after RESET: 00
PCR7…0…
Data Sheet
PCD
PCR
PCD7
PCR7
7
7
Pulse Count Detection
A LOS alarm is detected if the incoming data stream has no
transitions for a programmable number T consecutive pulse
positions. The number T is programmable via the PCD register and
can be calculated as follows:
T= 16
The maximum time is: 256 x 16 x 488 ns = 2 ms. Every detected pulse
resets the internal pulse counter. The counter is clocked with the
receive clock RCLK.
Pulse Count Recovery
A LOS alarm is cleared if a pulse density is detected in the received
bit stream. The number of pulses M which must occur in the
predefined PCD time interval is programmable via the PCR register
and can be calculated as follows:
M = N+1 ; with 0
The time interval starts with the first detected pulse transition. With
every received pulse a counter is incremented and the actual counter
is compared with the contents of PCR register. If the pulse number is
active. In this case the next detected pulse transition starts a new time
interval.
the PCR value the LOS alarm is reset; otherwise the alarm stays
H
H
(N+1) ; with 0
N
255.
216
N
255.
FALC-LH V1.3
PCD0
PCR0
E1 Registers
0
0
PEB 2255
2000-07
(36)
(37)