EP9312-IBZ Cirrus Logic Inc, EP9312-IBZ Datasheet - Page 274

• Manufacturer Part Number: EP9312-IBZ
• Description: IC ARM920T MCU 200MHZ 352-PBGA
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9312-IBZ

• Core Size: 16/32-Bit
• Package / Case: 352-BGA
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Controller Family/series: (ARM9)
• A/d Converter: 12 Bits
• No. Of I/o Pins: 65
• Clock Frequency: 200MHz
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1260

8
8-10
Graphics Accelerator
EP93xx User’s Guide
8.5.2.1 4 BPP Word Layout
memory and the other register, “DESTPIXELSTRT”, is used for the destination memory. All
start and stop values described below apply for source and destination values.
The two registers operate in an identical fashion for source and destination. To see how they
operate requires looking at several tables that show the memory layout for pixels in the
various color modes.
This 4 BPP mode example is somewhat difficult because the pixels are not in sequential
order. For a Block Copy where 8 pixels are transferred per scan line, let the starting SDRAM
address of the source image be 0x0000.
starts at bit 0, etc. The start pixel, P0, is in the word at address 0x0000 and has a beginning
bit position of 4. This makes 4 = 0x4 the value that is used for the SPEL field in the
“SRCPIXELSTRT”
Let the starting SDRAM address of the destination image be 0x0020.
Pixel 0 starts at bit 20, Pixel 1 starts at bit 16, etc. The start pixel, P0, is in the word at address
0x0020 and has a beginning bit position of 20. This makes 20 = 0x14 the value that is used
for the SPEL field in the
The end pixel, P7, is in the word at address 0x0024 and has a beginning bit position of 8. This
makes 8 = 0x8 the value that is used for the EPEL field in the
Note:The word count for this example would be: 2 - 1 = 1 words, since P7 ends in the 2nd word.
Address
Address
0x0000
0x0020
0x0024
So, WIDTH = 0x1 would be written to the
31
31
P6
P2
Table 8-14. 4 BPP Memory Layout for Destination Image
register.
28 27
28 27
Table 8-13. 4 BPP Memory Layout for Source Image
“DESTPIXELSTRT”
P7
P3
24 23
24 23
Copyright 2007 Cirrus Logic
P4
P0
20 19
20 19
Table 8-13
P5
P1
“BLKDESTWIDTH”
register.
16 15
16 15
P2
P6
shows that Pixel 0 starts at bit 4, Pixel 1
12 11
12 11
P3
P7
“DESTPIXELSTRT”
register.
8 7
8 7
P0
P4
Table 8-14
4 3
4 3
P1
P5
0
0
shows that
register.
DS785UM1