AT91SAM9R64-CU-999 Atmel, AT91SAM9R64-CU-999 Datasheet - Page 194

• Manufacturer Part Number: AT91SAM9R64-CU-999
• Description: IC MCU ARM9 64K SRAM 144LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9R64-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 72K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Data Converters: A/D 3x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: SPI, TWI, UART
• Maximum Clock Frequency: 240 MHz
• Number Of Programmable I/os: 118
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9RL-EK
• Minimum Operating Temperature: - 40 C
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

22.12.2
Figure 22-32. Clock Rate Transition Occurs while the SMC is Performing a Write Operation
6289C–ATARM–28-May-09
internal signal from PMC
Switching from (to) Slow Clock Mode to (from) Normal Mode
Slow Clock Mode
NBS0, NBS1,
NBS2, NBS3,
A0,A1
This write cycle finishes with the slow clock mode set
A
[25:2]
NWE
MCK
NCS
of parameters after the clock rate transition
When switching from slow clock mode to the normal mode, the current slow clock mode transfer
is completed at high clock rate, with the set of slow clock mode parameters.See
page
Figure 22-33
other.
194. The external device may not be fast enough to support such timings.
SLOW CLOCK MODE WRITE
1
NWE_CYCLE = 3
illustrates the recommended procedure to properly switch from one mode to the
1
1
SLOW CLOCK MODE WRITE
AT91SAM9R64/RL64 Preliminary
1
1
Slow clock mode transition is detected:
1
Reload Configuration Wait State
2
NORMAL MODE WRITE
NWE_CYCLE = 7
3
2
Figure 22-32 on
194