LPC3141FET180,551 NXP Semiconductors, LPC3141FET180,551 Datasheet - Page 19

• Manufacturer Part Number: LPC3141FET180,551
• Description: IC ARM9 MCU USB OTG 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC3000r

Specifications of LPC3141FET180,551

• Package / Case: 180-TFBGA
• Core Processor: ARM9
• Core Size: 32-Bit
• Speed: 270MHz
• Connectivity: EBI/EMI, I²C, IrDA, MMC, PCM, SPI, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, PWM, WDT
• Number Of I /o: 20
• Program Memory Type: ROMless
• Ram Size: 192K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC31
• Core: ARM926EJS
• Data Bus Width: 32 bit
• Data Ram Size: 192 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 270 MHz
• Number Of Timers: 5
• Operating Supply Voltage: 1.2 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: OM11037
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 935289711551

NXP Semiconductors
LPC3141_3143
Preliminary data sheet
6.10 High-speed Universal Serial Bus 2.0 On-The-Go (OTG)
6.9 Memory Card Interface (MCI)
The MCI controller interface can be used to access memory cards according to the
Secure Digital (SD) and Multi-Media Card (MMC) standards. The host controller can be
used to interface to small form factor expansion cards compliant to the SDIO card
standard as well. Finally, the MCI supports CE-ATA 1.1 compliant hard disk drives.
This module has the following features:
The USB OTG module allows the LPC3141/3143 to connect directly to a USB host such
as a PC (in device mode) or to a USB device in host mode. In addition, the LPC3141/3143
has a special, built-in mode in which it enumerates as a Device Firmware Upgrade (DFU)
class, and which allows for a (factory) download of the device firmware through USB.
This module has the following features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Implemented as two independent 96 kB memory banks
One 8-bit wide interface.
Supports high-speed SD, versions 1.01, 1.10 and 2.0.
Supports SDIO version 1.10.
Supports MMCplus, MMCmobile and MMCmicro cards based on MMC 4.1.
Supports SDHC memory cards.
CRC generation and checking.
Supports 1/4-bit SD cards.
Card detection and write protection.
FIFO buffers of 16 byte deep.
Host pull-up control.
SDIO suspend and resume.
1 to 65 535 byte blocks.
Suspend and resume operations.
SDIO read-wait.
Individual clock and power ON/OFF features to each card.
Maximum clock speed of 52 MHz (MMC 4.1).
Supports CE-ATA 1.1.
Supports 1-bit, 4-bit, and 8-bit MMC cards and CE-ATA devices.
Complies with Universal Serial Bus specification 2.0.
Complies with USB On-The-Go supplement.
Complies with Enhanced Host Controller Interface Specification.
Supports auto USB 2.0 mode discovery.
Supports all high-speed USB-compliant peripherals.
Supports all full-speed USB-compliant peripherals.
All information provided in this document is subject to legal disclaimers.
Rev. 0.16 — 27 May 2010
LPC3141/3143
© NXP B.V. 2010. All rights reserved.
19 of 74