R4F24269NVFQV Renesas Electronics America, R4F24269NVFQV Datasheet - Page 114

• Manufacturer Part Number: R4F24269NVFQV
• Description: MCU 256KB FLASH 64K 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2400r

Specifications of R4F24269NVFQV

• Core Processor: H8S/2600
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, I²C, IrDA, SCI, SSU, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 3 MCU Operating Modes
3.2
The following registers are related to operating mode setting.
•
•
3.2.1
MDCR monitors the current operating mode of this LSI.
Note:
3.2.2
SYSCR selects saturation operation for the MAC instruction, controls CPU access to the flash
memory control registers, sets the external bus mode, and enables or disables on-chip RAM.
Page 84 of 1372
Bit
7 to 3
2
1
0
Bit
7, 6
5
Mode control register (MDCR)
System control register (SYSCR)
Bit Name
⎯
MACS
*
Register Descriptions
Mode Control Register (MDCR)
System Control Register (SYSCR)
Bit Name
⎯
MDS2
MDS1
MDS0
Determined by the settings of pins MD2 to MD0.
Initial Value
All 1
0
Initial Value
All 0
⎯*
⎯*
⎯*
R/W
R/W
R/W
R/W
⎯
R
R
R
Descriptions
Reserved
The initial value should not be modified.
MAC Saturation Operation Control
Selects either saturation operation or non-saturation
operation for the MAC instruction.
0: MAC instruction performs non-saturation operation
1: MAC instruction performs saturation operation
Descriptions
Reserved
These bits are always read as 0 and cannot be
modified.
Mode Select 2 to 0
These bits indicate the input levels at mode pins
MD2 to MD0 (the current operating mode). Bits
MDS2 to MDS0 correspond to pins MD2 to MD0,
respectively. These bits are read-only bits and so
they cannot be modified. The input levels of the
MD2 to MD0 pins are latched into these bits when
MDCR is read. These latches are canceled by a
reset.
H8S/2426, H8S/2426R, H8S/2424 Group
REJ09B0466-0350 Rev. 3.50
Jul 09, 2010