DF2377RVFQ33 Renesas Electronics America, DF2377RVFQ33 Datasheet - Page 363

• Manufacturer Part Number: DF2377RVFQ33
• Description: IC H8S MCU FLASH 3V 384K 144LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2377RVFQ33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 97
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 6x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

• DMABCRL
Bit
7
6
5
4
Bit Name
DTE1B
DTE1A
DTE0B
DTE0A
Initial Value
0
0
0
0
R/W
R/W
R/W
R/W
R/W
Description
Data Transfer Enable 1B
Data Transfer Enable 1A
Data Transfer Enable 0B
Data Transfer Enable 0A
If the DTE bit is cleared to 0 when DTIE = 1, the
DMAC regards this as indicating the end of a
transfer, and issues a transfer end interrupt request
to the CPU or DTC.
When DTE = 0, data transfer is disabled and the
DMAC ignores the activation source selected by
the DTF3 to DTF0 bits in DMACR.
When DTE = 1, data transfer is enabled and the
DMAC waits for a request by the activation source
selected by the DTF3 to DTF0 bits in DMACR.
When a request is issued by the activation source,
DMA transfer is executed.
[Clearing conditions]
•
•
•
[Setting condition]
When 1 is written to the DTE bit after reading DTE
= 0
When initialization is performed
When the specified number of transfers have
been completed in a transfer mode other than
repeat mode
When 0 is written to the DTE bit to forcibly
suspend the transfer, or for a similar reason
Rev.7.00 Mar. 18, 2009 page 295 of 1136
Section 7 DMA Controller (DMAC)
REJ09B0109-0700