MC56F8323VFB60 Freescale Semiconductor, MC56F8323VFB60 Datasheet - Page 25

• Manufacturer Part Number: MC56F8323VFB60
• Description: IC MPU HYBRID DSP 32K 64-LQFP
• Manufacturer: Freescale Semiconductor
• Series: 56F8xxxr

Specifications of MC56F8323VFB60

• Core Processor: 56800
• Core Size: 16-Bit
• Speed: 60MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 27
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.25 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 64-LQFP
• For Use With: MC56F8323EVME - BOARD EVALUATION MC56F8323
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Freescale Semiconductor
Preliminary
Signal Name
(GPIOA2)
(GPIOA3)
(GPIOA4)
(MISO1)
(MOSI1)
PWMA2
PWMA3
PWMA4
(SS1)
Table 2-2 Signal and Package Information for the 64-Pin LQFP
Pin No.
7
8
9
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Schmitt
Output
Output
Output
Output
Output
Output
Output
Output
Input/
Input/
Input/
Input/
Input/
Type
Input
State During
disabled,
pull-up is
disabled,
pull-up is
disabled,
pull-up is
output is
output is
output is
In reset,
In reset,
In reset,
enabled
enabled
enabled
Reset
56F8323 Technical Data, Rev. 17
PWMA2 — This is one of six PWMA output pins.
SPI 1 Slave Select — SS1 is used in slave mode to indicate to the
SPI module that the current transfer is to be received.
Port A GPIO — This GPIO pin can be individually programmed as
an input or output pin.
In the 56F8323, the default state after reset is PWMA2.
In the 56F8123, the default state is not one of the functions offered
and must be reconfigured.
PWMA3 — This is one of six PWMA output pins.
SPI 1 Master In/Slave Out — This serial data pin is an input to a
master device and an output from a slave device. The MISO line of a
slave device is placed in the high-impedance state if the slave device
is not selected. The slave device places data on the MISO line a
half-cycle before the clock edge the master device uses to latch the
data.
Port A GPIO — This GPIO pin can be individually programmed as
an input or output pin.
In the 56F8323, the default state after reset is PWMA3.
In the 56F8123, the default state is not one of the functions offered
and must be reconfigured.
PWMA4 — This is one of six PWMA output pins.
SPI 1 Master Out/Slave In — This serial data pin is an output from a
master device and an input to a slave device. The master device
places data on the MOSI line a half-cycle before the clock edge the
slave device uses to latch the data.
Port A GPIO — This GPIO pin can be individually programmed as
an input or output pin.
In the 56F8323, the default state after reset is PWMA4.
In the 56F8123, the default state is not one of the functions offered
and must be reconfigured.
Signal Description
Signal Pins
25