MC56F8323VFB60 Freescale Semiconductor, MC56F8323VFB60 Datasheet - Page 83

• Manufacturer Part Number: MC56F8323VFB60
• Description: IC MPU HYBRID DSP 32K 64-LQFP
• Manufacturer: Freescale Semiconductor
• Series: 56F8xxxr

Specifications of MC56F8323VFB60

• Core Processor: 56800
• Core Size: 16-Bit
• Speed: 60MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 27
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 2.25 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 64-LQFP
• For Use With: MC56F8323EVME - BOARD EVALUATION MC56F8323
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Part 6 System Integration Module (SIM)
6.1 Introduction
The SIM module is a system catchall for the glue logic that ties together the system-on-chip. It controls
distribution of resets and clocks and provides a number of control features. The system integration module
is responsible for the following functions:
These are discussed in more detail in the sections that follow.
6.2 Features
The SIM has the following features:
Freescale Semiconductor
Preliminary
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Reset sequencing
Clock control & distribution
Stop/Wait control
Pull-up enables for selected peripherals
System status registers
Registers for software access to the JTAG ID of the chip
Enforcing Flash security
Flash security feature prevents unauthorized access to code/data contained in on-chip flash memory
Power-saving clock gating for peripherals
Three power modes (Run, Wait, Stop) to control power utilization
— Stop mode shuts down the 56800E core, system clock, and peripheral clock
— Stop mode entry can optionally disable PLL and Oscillator (low power vs. fast restart)
— Wait mode shuts down the 56800E core and unnecessary system clock operation
— Run mode supports full part operation
Controls to enable/disable the 56800E core WAIT and STOP instructions
Controls reset sequencing after reset
Software-initiated reset
Four 16-bit registers reset only by a Power-On Reset usable for general-purpose software control
System Control Register
Registers for software access to the JTAG ID of the chip
56F8323 Technical Data, Rev. 17
Introduction
83