CYRF69213-40LFXC Cypress Semiconductor Corp, CYRF69213-40LFXC Datasheet - Page 13

• Manufacturer Part Number: CYRF69213-40LFXC
• Description: IC PROC 8K FLASH 40VQFN
• Manufacturer: Cypress Semiconductor Corp
• Series: CYRFr
• Type: Transceiverr

Specifications of CYRF69213-40LFXC

• Package / Case: 40-VQFN Exposed Pad, 40-HVQFN, 40-SQFN, 40-DHVQFN
• Frequency: 2.4GHz
• Data Rate - Maximum: 1Mbps
• Modulation Or Protocol: ISM
• Applications: General Purpose
• Power - Output: 4dBm
• Sensitivity: -97dBm
• Voltage - Supply: 4 V ~ 5.5 V
• Current - Receiving: 23.4mA
• Current - Transmitting: 36.6mA
• Data Interface: PCB, Surface Mount
• Memory Size: 8kB Flash, 256B SRAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: 0°C ~ 70°C
• Operating Frequency: 2497 MHz
• Operating Supply Voltage: 2.5 V or 3.3 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 1.8V
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (max): 3.6V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 770-1001 - ISP 4PORT CYPRESS ENCORE II MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-1934

Addressing Modes
Examples of the different addressing modes are discussed in
this section and example code is given.
Source Immediate
The result of an instruction using this addressing mode is placed
in the A register, the F register, the SP register, or the X register,
which is specified as part of the instruction opcode. Operand 1
is an immediate value that serves as a source for the instruction.
Arithmetic instructions require two sources. Instructions using
this addressing mode are two bytes in length.
Table 11. Source Immediate
Examples
Source Direct
The result of an instruction using this addressing mode is placed
in either the A register or the X register, which is specified as part
of the instruction opcode. Operand 1 is an address that points to
a location in either the RAM memory space or the register space
that is the source for the instruction. Arithmetic instructions
require two sources; the second source is the A register or X
register specified in the opcode. Instructions using this
addressing mode are two bytes in length.
Table 12. Source Direct
Examples
Document #: 001-07552 Rev. *D
Instruction
ADD
MOV
AND
Instruction
ADD
MOV
A,
X,
F,
Opcode
Opcode
A,
X,
7
8
9
[7]
REG[8]
;In this case, the immediate value
;of 7 is added with the Accumulator,
;and the result is placed in the
;Accumulator.
;In this case, the immediate value
;of 8 is moved to the X register.
;In this case, the immediate value
;of 9 is logically ANDed with the F
;register and the result is placed
;in the F register.
;In this case, the value in
;the RAM memory location at
;address 7 is added with the
;Accumulator, and the result
;is placed in the Accumulator.
;In this case, the value in
;the register space at address
;8 is moved to the X register.
Immediate Value
Source Address
Operand 1
Operand 1
Source Indexed
The result of an instruction using this addressing mode is placed
in either the A register or the X register, which is specified as part
of the instruction opcode. Operand 1 is added to the X register
forming an address that points to a location in either the RAM
memory space or the register space that is the source for the
instruction. Arithmetic instructions require two sources; the
second source is the A register or X register specified in the
opcode. Instructions using this addressing mode are two bytes
in length.
Table 13. Source Indexed
Examples
Destination Direct
The result of an instruction using this addressing mode is placed
within either the RAM memory space or the register space.
Operand 1 is an address that points to the location of the result.
The source for the instruction is either the A register or the X
register, which is specified as part of the instruction opcode.
Arithmetic instructions require two sources; the second source is
the location specified by Operand 1. Instructions using this
addressing mode are two bytes in length.
Table 14. Destination Direct
Examples
ADD
MOV
Instruction
ADD
MOV
Instruction
A,
X,
Opcode
Opcode
[7],
REG[8], A
[X+7]
REG[X+8]
A
Destination Address
Source Index
;In this case, the value in
;the memory location at
;address 7 is added with the
;Accumulator, and the result
;is placed in the memory
;location at address 7. The
;Accumulator is unchanged.
;In this case, the Accumula-
;tor is moved to the regis-
;ter space location at
;address 8. The Accumulator
;is unchanged.
;In this case, the value in
;the memory location at
;address X + 7 is added with
;the Accumulator, and the
;result is placed in the
;Accumulator.
;In this case, the value in
;the register space at
;address X + 8 is moved to
;the X register.
Operand 1
Operand 1
CYRF69213
Page 13 of 77
[+] Feedback