CYRF69213-40LFXC Cypress Semiconductor Corp, CYRF69213-40LFXC Datasheet - Page 2

• Manufacturer Part Number: CYRF69213-40LFXC
• Description: IC PROC 8K FLASH 40VQFN
• Manufacturer: Cypress Semiconductor Corp
• Series: CYRFr
• Type: Transceiverr

Specifications of CYRF69213-40LFXC

• Package / Case: 40-VQFN Exposed Pad, 40-HVQFN, 40-SQFN, 40-DHVQFN
• Frequency: 2.4GHz
• Data Rate - Maximum: 1Mbps
• Modulation Or Protocol: ISM
• Applications: General Purpose
• Power - Output: 4dBm
• Sensitivity: -97dBm
• Voltage - Supply: 4 V ~ 5.5 V
• Current - Receiving: 23.4mA
• Current - Transmitting: 36.6mA
• Data Interface: PCB, Surface Mount
• Memory Size: 8kB Flash, 256B SRAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: 0°C ~ 70°C
• Operating Frequency: 2497 MHz
• Operating Supply Voltage: 2.5 V or 3.3 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 1.8V
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (max): 3.6V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 770-1001 - ISP 4PORT CYPRESS ENCORE II MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-1934

Applications
The CYRF69213 PRoC LP Low Speed is targeted for the
following applications:
■
■
Functional Description
PRoC LP devices are integrated radio and microcontroller
functions in the same package to provide a dual role single-chip
solution.
Communication between the microcontroller and the radio is via
the SPI interface between both functions.
Functional Overview
The CYRF69213 is a complete Radio System-on-Chip device,
providing a complete RF system solution with a single device and
a few discrete components. The CYRF69213 is designed to
implement low cost wireless systems operating in the worldwide
2.4 GHz Industrial, Scientific, and Medical (ISM) frequency band
(2.400 GHz–2.4835 GHz).
2.4 GHz Radio Function
The radio meets the following world wide regulatory require-
ments:
■
■
■
Document #: 001-07552 Rev. *D
USB Bridge for Human Interface Devices (HID)
❐
❐
❐
❐
USB Bridge for General Purpose Applications
❐
❐
❐
❐
❐
Europe
❐
❐
North America
❐
Japan
❐
Wireless mice
Wireless keyboards
Remote controls
Gaming applications
Consumer electronics
Industrial applications
White goods
Home automation
Personal health
ETSI EN 301 489-1 V1.4.1
ETSI EN 300 328-1 V1.3.1
FCC CFR 47 Part 15
ARIB STD-T66
Data Transmission Modes
The radio supports four different data transmission modes:
■
■
■
■
Both 64-chip and 32-chip data PN codes are supported. The four
data transmission modes apply to the data after the Start of
Packet (SOP). In particular, the packet length, data and CRC are
all sent in the same mode.
USB Microcontroller Function
The microcontroller function is based on the powerful
CYRF69213 microcontroller. It is an 8-bit Flash programmable
microcontroller with integrated low speed USB interface.
The microcontroller has up to 14 GPIO pins to support USB,
PS/2 and other applications. Each GPIO port supports high
impedance inputs, configurable pull up, open drain output,
CMOS/TTL inputs and CMOS output. Up to two pins support
programmable drive strength of up to 50 mA. Additionally each
I/O pin can be used to generate a GPIO interrupt to the micro-
controller. Each GPIO port has its own GPIO interrupt vector with
the exception of GPIO Port 0.
The microcontroller features an internal oscillator. With the
presence of USB traffic, the internal oscillator can be set to
precisely tune to USB timing requirements (24 MHz ± 1.5%).
The PRoC LP has up to 8 Kbytes of Flash for user’s firmware
code and up to 256 bytes of RAM for stack space and user
variables.
The PRoC LP includes a Watchdog timer, a vectored interrupt
controller, a 12-bit programmable interval timer with configurable
1 ms interrupt and a 16-bit free running timer with capture
registers.
In GFSK mode, data is transmitted at 1 Mbps without any DSSS
In 8DR mode, 1 byte is encoded in each PN code symbol trans-
mitted
In DDR mode, 2 bits are encoded in each PN code symbol
transmitted
In SDR mode, a single bit is encoded in each PN code symbol
transmitted
CYRF69213
Page 2 of 77
[+] Feedback