AGLE600V2-FGG484 Actel, AGLE600V2-FGG484 Datasheet - Page 13

• Manufacturer Part Number: AGLE600V2-FGG484
• Description: FPGA - Field Programmable Gate Array 600K System Gates
• Manufacturer: Actel

Specifications of AGLE600V2-FGG484

• Processor Series: AGLE600
• Core: IP Core
• Maximum Operating Frequency: 526.32 MHz, 892.86 MHz
• Number Of Programmable I/os: 270
• Data Ram Size: 110592
• Supply Voltage (max): 1.575 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Development Tools By Supplier: AGL-Icicle-Kit, AGL-Dev-Kit-SCS, Silicon-Explorer II, Silicon-Sculptor 3, SI-EX-TCA, FlashPro 4, FlashPro 3, FlashPro Lite
• Mounting Style: SMD/SMT
• Supply Voltage (min): 1.14 V
• Number Of Gates: 600 K
• Package / Case: FPBGA-484
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Global Clocking
IGLOOe devices have extensive support for multiple clocking domains. In addition to the CCC and PLL
support described above, there is a comprehensive global clock distribution network.
Each VersaTile input and output port has access to nine VersaNets: six chip (main) and three quadrant
global networks. The VersaNets can be driven by the CCC or directly accessed from the core via
multiplexers (MUXes). The VersaNets can be used to distribute low-skew clock signals or for rapid
distribution of high-fanout nets.
Pro I/Os with Advanced I/O Standards
The IGLOOe family of FPGAs features a flexible I/O structure, supporting a range of voltages (1.2 V,
1.5 V, 1.8 V, 2.5 V, 3.0 V wide range, and 3.3 V). IGLOOe FPGAs support 19 different I/O standards,
including single-ended, differential, and voltage-referenced. The I/Os are organized into banks, with eight
banks per device (two per side). The configuration of these banks determines the I/O standards
supported. Each I/O bank is subdivided into V
V
Therefore, if any I/O in a given V
minibank will be able to use that reference voltage.
Each I/O module contains several input, output, and enable registers. These registers allow the
implementation of the following:
IGLOOe banks support M-LVDS with 20 multi-drop points.
Hot-swap (also called hot-plug, or hot-insertion) is the operation of hot-insertion or hot-removal of a card
in a powered-up system.
Cold-sparing (also called cold-swap) refers to the ability of a device to leave system data undisturbed
when the system is powered up, while the component itself is powered down, or when power supplies
are floating.
Wide Range I/O Support
Actel IGLOOe devices support JEDEC-defined wide range I/O operation. IGLOOe devices support both
the JESD8-B specification, covering 3.0 V and 3.3 V supplies, for an effective operating range of 2.7 V to
3.6 V, and JESD8-12 with its 1.2 V nominal, supporting an effective operating range of 1.14 V to 1.575 V.
Wider I/O range means designers can eliminate power supplies or power conditioning components from
the board or move to less costly components with greater tolerances. Wide range eases I/O bank
management and provides enhanced protection from system voltage spikes, while providing the flexibility
to easily run custom voltage applications.
REF
•
•
minibanks contain 8 to 18 I/Os. All the I/Os in a given minibank share a common V
Single-Data-Rate applications (e.g., PCI 66 MHz, bidirectional SSTL 2 and 3, Class I and II)
Double-Data-Rate applications (e.g., DDR LVDS, B-LVDS, and M-LVDS I/Os for point-to-point
communications, and DDR 200 MHz SRAM using bidirectional HSTL Class II).
REF
minibank is configured as a V
R e v i s i o n 8
REF
minibanks, which are used by voltage-referenced I/Os.
REF
IGLOOe Low Power Flash FPGAs
pin, the remaining I/Os in that
REF
line.
1 -7