PNX1500E/G,557 NXP Semiconductors, PNX1500E/G,557 Datasheet - Page 232

• Manufacturer Part Number: PNX1500E/G,557
• Description: IC MEDIA PROC 240MHZ 456-BGA
• Manufacturer: NXP Semiconductors

Specifications of PNX1500E/G,557

• Applications: Multimedia
• Core Processor: TriMedia
• Controller Series: Nexperia
• Interface: I²C, 2-Wire Serial
• Number Of I /o: 61
• Voltage - Supply: 1.14 V ~ 1.26 V
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 456-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Program Memory Type: -
• Ram Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 568-1296; 935277746557; PNX1500E/G

NXP Semiconductors
Volume 1 of 1
PNX15XX_PNX952X_SER_N_4
Product data sheet
All IDE disk registers (eight command and one control) are accessible via PI. All IDE
disk registers are indirectly accessed via GPXIO registers.
diagram of the IDE interface.
The IDE port is multiplexed with PCI, FLASH and Motorola interface pins. There are
two dedicated pins, IDE_ENABLE (in this example XIO_SEL[1]) and INTREQ. The
IDE Disk interrupt (INTREQ) is connected to a GPIO signal, which is routed to the
VIC through GPIO or any direct interrupt line.
The PNX15xx/952x Series SYS_RSTN_OUT can be connected with the IDE
interface reset. All outputs are driven on PCI_CLK. All inputs are registered on
PCI_CLK. The Low and High periods of DIOR/DIOW are programmable (using sel
profile register).
All physical signals need to be isolated from PCI on the board as shown in
Figure 11: IDE Interface
PNX15xx/952x Series
Rev. 4.0 — 03 December 2007
PCI AD[31:16] - DD[15:0]
XIO_SEL[1] - IDE_ENABLE
PCI_AD0 - IORDY
Outputs
INTREQ
PNX15xx/952x Series
Chapter 7: PCI-XIO Module
Figure 11
IDE Cable
© NXP B.V. 2007. All rights reserved.
shows a block
Figure 12
7-232