TDGL003 Microchip Technology, TDGL003 Datasheet - Page 85

• Manufacturer Part Number: TDGL003
• Description: ChipKIT Max32 Development Board PIC32 Boards And Kits
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr
• Type: MCUr

Specifications of TDGL003

• Silicon Manufacturer: Microchip
• Core Architecture: MIPS
• Core Sub-architecture: PIC32
• Silicon Core Number: PIC32MX
• Silicon Family Name: PIC32MX795Fxxxx
• Kit Contents: Board Only
• Contents: Board
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: MPLAB®, Arduino™ Mega

5.0
PIC32MX3XX/4XX
program Flash memory for executing user code. There
are three methods by which the user can program this
memory:
• Run-Time Self Programming (RTSP)
• In-Circuit Serial Programming™ (ICSP™)
• EJTAG Programming
EXAMPLE 5-1:
© 2011 Microchip Technology Inc.
NVMCON = 0x4004;
Wait(delay);
NVMKEY = 0xAA996655;
NVMKEY = 0x556699AA;
NVMCONSET = 0x8000;
while(NVMCONbits.WR==1);
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
FLASH PROGRAM MEMORY
of the PIC32MX3XX/4XX family of
devices. It is not intended to be a compre-
hensive reference source. To comple-
ment the information in this data sheet,
refer to Section 5. “Flash Program
Memory” (DS61121) of the “PIC32
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
Family Reference Manual”, which is
available from the Microchip web site
(www.microchip.com/PIC32).
devices
contain
// Enable and configure for erase operation
// Delay for 6 µs for LVDstartup
// Initiate operation
// Wait for current operation to complete
an
internal
in
RTSP is performed by software executing from either
Flash or RAM memory. EJTAG is performed using the
EJTAG port of the device and a EJTAG capable
programmer. ICSP is performed using a serial data
connection to the device and allows much faster pro-
gramming times than RTSP. RTSP techniques are
described in this chapter. The ICSP and EJTAG
methods are described in the “PIC32MX Flash
Programming Specification” (DS61145), which can be
downloaded from the Microchip web site.
Note:
PIC32MX3XX/4XX
Flash LVD Delay (LVDstartup) must be
taken into account between setting up and
executing any Flash command operation.
See
set up and execute a Flash command
operation.
Example 5-1
for a code example to
DS61143H-page 85