LFSC3GA15E-7FN256C Lattice, LFSC3GA15E-7FN256C Datasheet - Page 80

• Manufacturer Part Number: LFSC3GA15E-7FN256C
• Description: IC FPGA 15.2KLUTS 256FPBGA
• Manufacturer: Lattice

Specifications of LFSC3GA15E-7FN256C

• Number Of Logic Elements/cells: *
• Number Of Labs/clbs: *
• Total Ram Bits: *
• Number Of I /o: *
• Number Of Gates: *
• Voltage - Supply: *
• Mounting Type: *
• Operating Temperature: *
• Package / Case: *
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Signal Descriptions (Cont.)
Lattice Semiconductor
RESP_[ULC/URC]
RESPN_[ULC/URC]
[A:D]_VDDIBx_[L/R]
[A:D]_VDDOBx_[L/R]
[A:D]_VDDAX25_[L/R]
1. The ispLEVER software tools may specify VDDRX, VDDTX, VDDP and VCCL pins. These pins should be considered VCC12 pins.
Note: Signals listed as Signal A / Signal B define the same physical pin that is used for different functions based on configuration
mode.
Signal Name
I/O
—
—
—
—
—
Calibration resistor to be placed between this pin and either ground or
RESPN_[ULC/URC]. RESPN_[ULC/URC] is available on select pack-
ages. If available, connection of calibration resistor between
RESP_[ULC/URC] and RESPN_[ULC/URC] takes precedence over
connection of calibration resistor between RESP_[ULC/URC] and
ground. Note: only one per side of the device. Value: 4.02K ohm
+/- 1% ohm.
Available on selected packages. If available, calibration resistor should
be placed between RESP_[ULC/URC] and RESPN_[ULC/URC]
instead of between RESP_[ULC/URC] and ground. Note: only one per
side of the device. Value: 4.02K ohm +/- 1% ohm.
Input buffer power supply for channel x (1.2V/1.5V) on left [L] or right
[R] side of device.
Output buffer power supply for channel x (1.2V/1.5V) on left [L] or right
[R] side of device.
Auxiliary power for input and output termination (2.5V) on left [L] or
right [R] side of device.
4-6
LatticeSC/M Family Data Sheet
Description
Pinout Information