AT32UC3A3128 Atmel Corporation, AT32UC3A3128 Datasheet - Page 591

• Manufacturer Part Number: AT32UC3A3128
• Manufacturer: Atmel Corporation

Specifications of AT32UC3A3128

• Flash (kbytes): 128 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 110
• Ext Interrupts: 110
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device + OTG
• Spi: 6
• Twi (i2c): 2
• Uart: 4
• Lin: 4
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 2
• Dac Resolution (bits): 16
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 128
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 18
• Input Capture Channels: 12
• Pwm Channels: 12
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

• MODE9: 9-bit Character Length
• MSBF/CPOL: Bit Order or SPI Clock Polarity
• CHMODE: Channel Mode
Table 25-17.
• NBSTOP: Number of Stop Bits
Table 25-18.
• PAR: Parity Type
Table 25-19.
• SYNC/CPHA: Synchronous Mode Select or SPI Clock Phase
32072G–11/2011
0
0
1
1
0
0
1
1
0
0
0
0
1
1
CHMODE
NBSTOP
0: CHRL defines character length.
1: 9-bit character length.
If USART does not operate in SPI Mode:
MSBF=0: Least Significant Bit is sent/received first.
MSBF=1: Most Significant Bit is sent/received first.
If USART operates in SPI Mode, CPOL is used with CPHA to produce the required clock/data relationship between devices.
CPOL=0: The inactive state value of CLK is logic level zero.
CPOL=1: The inactive state value of CLK is logic level one.
If USART does not operate in SPI Mode (MODE is … 0xE and 0xF):
SYNC = 0: USART operates in Asynchronous Mode.
SYNC = 1: USART operates in Synchronous Mode.
If USART operates in SPI Mode, CPHA determines which edge of CLK causes data to change and which edge causes data to
be captured. CPHA is used with CPOL to produce the required clock/data relationship between master and slave devices.
CPHA = 0: Data is changed on the leading edge of CLK and captured on the following edge of CLK.
PAR
0
1
0
1
0
1
0
1
0
0
1
1
0
1
Mode Description
Normal Mode
Automatic Echo. Receiver input is connected to the TXD pin.
Local Loopback. Transmitter output is connected to the Receiver input.
Remote Loopback. RXD pin is internally connected to the TXD pin.
Asynchronous (SYNC=0)
1 stop bit
1.5 stop bits
2 stop bits
Reserved
0
1
0
1
x
x
Parity Type
Even parity
Odd parity
Parity forced to 0 (Space)
Parity forced to 1 (Mark)
No parity
Multidrop mode
Synchronous (SYNC=1)
1 stop bit
Reserved
2 stop bits
Reserved
591