ATtiny43U Atmel Corporation, ATtiny43U Datasheet - Page 15

• Manufacturer Part Number: ATtiny43U
• Manufacturer: Atmel Corporation

Specifications of ATtiny43U

• Flash (kbytes): 4 Kbytes
• Pin Count: 20
• Max. Operating Frequency: 8 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 8
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 16
• Ext Interrupts: 16
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 4
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 0.25
• Eeprom (bytes): 64
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: Yes
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 0.7 to 5.5
• Operating Voltage (vcc): 0.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 4
• Pwm Channels: 4
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

5. Memories
5.1
5.2
5.3
8048B–AVR–03/09
Overview
In-System Re-programmable Flash Program Memory
SRAM Data Memory
This section describes the different memories in ATtiny43U. The AVR architecture has two main
memory spaces, the Data memory and the Program memory space. In addition, the ATtiny43U
features an EEPROM Memory for data storage. All three memory spaces are linear and regular.
The ATtiny43U contains 4K byte On-chip In-System Reprogrammable Flash memory for pro-
gram storage. Since all AVR instructions are 16 or 32 bits wide, the Flash is organized as 2048 x
16.
The Flash memory has an endurance of at least 10,000 write/erase cycles. The ATtiny43U Pro-
gram Counter (PC) is 11 bits wide, thus addressing the 2048 Program memory locations.
“Memory Programming” on page 139
Constant tables can be allocated within the entire Program memory address space (see the
LPM – Load Program memory instruction description).
Timing diagrams for instruction fetch and execution are presented in
ing” on page
Figure 5-1.
Figure 5-2 on page 16
The low Data memory locations address both the Register File, the I/O memory and the internal
data SRAM, as follows:
The five different addressing modes for the Data memory cover: Direct, Indirect with Displace-
ment, Indirect, Indirect with Pre-decrement, and Indirect with Post-increment. In the Register
File, registers R26 to R31 feature the indirect addressing pointer registers.
• The first 32 locations address the Register File
• The next 64 locations address the standard I/O memory
• The last 256 locations address the internal data SRAM
12.
Program Memory Map
shows how the ATtiny43U SRAM Memory is organized.
Program Memory
contains a detailed description on Flash data downloading.
0x07FF
0x0000
“Instruction Execution Tim-
15