SAM9X35 Atmel Corporation, SAM9X35 Datasheet - Page 492

• Manufacturer Part Number: SAM9X35
• Manufacturer: Atmel Corporation

Specifications of SAM9X35

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 105
• Ext Interrupts: 105
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 3
• Uart: 7
• Can: 2
• Lin: 4
• Ssc: 1
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 12
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: DDR/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

Figure 31-13. Multi-buffer Transfer with Source Address Auto-reloaded and Contiguous Destination Address
492
492
SAM9X35
SAM9X35
Address of
Source Layer
The transfer is similar to that shown in
The DMAC Transfer flow is shown in
b. If the buffer complete interrupt is masked (DMAC_EBCIMR.BTC[x] = ‘1’, where x is
SADDR
automatic transfer mode bit should remain enabled to keep the DMAC in Row 11 as
shown in
the channel number) then hardware does not stall until it detects a write to the buf-
fer transfer completed interrupt enable register but starts the next buffer transfer
immediately. In this case software must clear the automatic mode bit,
DMAC_CTRLBx.AUTO, to put the device into ROW 1 of
before the last buffer of the DMAC transfer has completed.
Source Buffers
Table 31-3 on page
Figure 31-14 on page
Buffer0
Buffer2
Buffer1
Figure 31-13 on page
477.
Destination Buffers
DADDR(0)
DADDR(1)
DADDR(2)
Destination Layer
493.
Address of
492.
Table 31-3 on page 477
11055B–ATARM–22-Sep-11
11055B–ATARM–22-Sep-11