kfm2g16q2a-deb8 Samsung Semiconductor, Inc., kfm2g16q2a-deb8 Datasheet - Page 123

• Manufacturer Part Number: kfm2g16q2a-deb8
• Description: 2gb Muxonenand A-die
• Manufacturer: Samsung Semiconductor, Inc.

3.14.2 OTP Block Program Operation
An OTP Block Program Operation accesses the OTP area and programs content from the DataRAM on-chip buffer to the designated page(s)
of the OTP.
A memory location in the OTP area can be programmed only one time (no erase operation permitted).
The OTP area is programmed using the same sequence as normal program operation after being accessed by the command (see section 3.8
for more information).
Programming the OTP Area
MuxOneNAND2G(KFM2G16Q2A-DEBx)
MuxOneNAND4G(KFN4G16Q2A-DEBx)
• Issue the OTP Access Command.
• Write data into the DataRAM (data can be input at anytime between the "Start" and "Write Program" commands.
• Issue a Flash Block Address (FBA) which is unlocked area address of NAND Flash Array address map.
• Issue a Write Program command to program the data from the DataRAM into the OTP.
• When the OTP Block programming is complete, do a Cold-, Warm-, Hot-, NAND Flash Core Reset to exit the OTP Access mode.
- 123 -
FLASH MEMORY