sed1374 ETC-unknow, sed1374 Datasheet - Page 209

• Manufacturer Part Number: sed1374
• Description: Sed1374 Embedded Memory Color Lcd Controller
• Manufacturer: ETC-unknow

Epson Research and Development
Vancouver Design Center
1374VIRT Example
Program Messages
1374VIRT Display Utility
Issue Date: 98/10/20
ERROR: Too many devices registered.
There are too many display devices attached to the HAL. The HAL currently can manage only one
device.
ERROR: Could not register 1374 device.
A 1374 device was not found at the configured addresses. Check the configuration address using the
1374CFG configuration program.
ERROR: Did not detect 1374.
The HAL was unable to read the revision code register on the SED1374. Ensure that the SED1374
hardware is installed and that the hardware platform has been set up correctly.
1. Type “1374virt /a” to automatically pan and scroll.
2. Press "b" to change the bits-per-pixel from 1 bit-per-pixel to 2 bits-per-pixel.
3. Repeat steps 1 and 2 for the remaining color depths (4 and 8 bit-per-pixel).
4. Press <ESC> to exit the program.
X26A-B-004-01
SED1374
Page 5