sed1374 ETC-unknow, sed1374 Datasheet - Page 214

• Manufacturer Part Number: sed1374
• Description: Sed1374 Embedded Memory Color Lcd Controller
• Manufacturer: ETC-unknow

Page 4
Installation
Usage
SED1374
X26A-B-005-02
PC platform: copy the file 1374PLAY.EXE to a directory that is in the DOS path on your
hard drive.
Embedded platform: download the program 1374PLAY to the system.
PC platform: at the prompt, type 1374play [/?].
Embedded platform: execute 1374play and at the prompt, type the command line
argument.
Where: /? displays program revision information.
The following commands are valid within the 1374PLAY program.
X index [data]
XA
L index [data1 data2 data3]
LA
F[W] addr1 addr2 data . . .
R[W] addr [count]
W[W] addr data . . .
I
Reads/writes the registers.
Writes data to the register specified by the index
when “data” is specified; otherwise the register is
read.
Reads all registers.
Reads/writes Look-Up Table (LUT) values.
Writes data to the LUT index when “data” is
specified; otherwise the LUT index is read.
Data must consist of 3 bytes: 1 red, 1 green, 1
Reads all LUT values.
Fills bytes or words from address 1 to address 2
with data. Data can be multiple values
(e.g. F 0 20 1 2 3 4 fills address 0 to 0x20
Reads “count” of bytes or words from the address
specified by “addr”. If “count” is not specified,
then 16 bytes/words are read.
Writes bytes or words of data to address specified
by “addr”. Data can be multiple values
e.g. W 0 1 2 3 4 writes the byte values
1 2 3 4 starting at address 0).
Initializes the chip with user specified
configuration.
blue. and range in value from 0x00 to 0x0F.
with a repeating pattern of 1 2 3 4).
Epson Research and Development
1374PLAY Diagnostic Utility
Vancouver Design Center
Issue Date: 99/11/29