MC68HC05P9ACDW FREESCALE [Freescale Semiconductor, Inc], MC68HC05P9ACDW Datasheet - Page 123

no-image

MC68HC05P9ACDW

Manufacturer Part Number
MC68HC05P9ACDW
Description
HCMOS Microcontroller Unit
Manufacturer
FREESCALE [Freescale Semiconductor, Inc]
Datasheet
11-mc68hc05p9a
MOTOROLA
ADRC — ADC RC (Oscillator)
When the internal RC oscillator is being used as the ADC clock, two
limitations apply:
ADON — ADC On
Bits 4 and 3 — Not used
This read/write bit turns on the internal RC oscillator to drive the ADC.
If the internal clock frequency (f
set. When the RC oscillator is turned on, it requires a time, t
stabilize, and results can be inaccurate during this time. Resets clear
the ADRC bit.
This read/write bit turns on the ADC. When the ADC is on, it requires
a time, t
results can be inaccurate. Resets clear the ADON bit.
Bits 4 and 3 always read as logic 0s.
Freescale Semiconductor, Inc.
For More Information On This Product,
1 = Internal RC oscillator drives ADC
0 = Internal clock drives ADC
1 = ADC turned on
0 = ADC turned off
Because of the frequency tolerance of the RC oscillator and its
asynchronism with the internal clock, the conversion complete flag
must be used to determine when a conversion sequence is
complete.
The conversion process runs at the nominal 1.5-MHz rate, but the
conversion results must be transferred to the ADC data register
synchronously with the internal clock; therefore, the conversion
process is limited to a maximum of one channel every internal
clock cycle.
ADON
Go to: www.freescale.com
, for the current sources to stabilize. During this time,
ADC
OP
) is less than 1 MHz, ADRC must be
I/O Registers
ADRC
, to
ADC
123

Related parts for MC68HC05P9ACDW