N25Q128A13BSF40F NUMONYX, N25Q128A13BSF40F Datasheet - Page 130

• Manufacturer Part Number: N25Q128A13BSF40F
• Description: IC SRL FLASH 128MB NMX 16-SOIC
• Manufacturer: NUMONYX
• Series: Forté™r

Specifications of N25Q128A13BSF40F

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 128M (16M x 8)
• Speed: 108MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Instructions
9.3.26
130/157
Reset Enable and Reset Memory, Quad I/O
The Reset Enable and Reset Memory operation is used as a system software reset that
puts the device in the power-on reset condition.
This operation consists of two instructions: Reset Enable and Reset Memory.
The Reset operation requires the Reset Enable instruction followed by the Reset Memory
instruction. If the Reset Enable instruction is followed by any instruction other than Reset
Memory, it is disabled. Reset Memory is also disabled if the device is selected by driving
chip select (S) and Clock (C) low.
This instruction functions exactly as the Reset Enable instruction of the Extended SPI
protocol, except that for this instruction the instruction code and input data are on four pins,
DQ0, DQ1, DQ2 and DQ3.
Figure 101. Reset Enable and Reset Memory Instruction Sequence, Quad I/O
DQ0
DQ1
DQ2
DQ3
S#
C
0
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
0
1
©2010 Micron Technology, Inc. All rights reserved.
N25Q128 - 3 V