N25Q128A13BSF40F NUMONYX, N25Q128A13BSF40F Datasheet - Page 136

• Manufacturer Part Number: N25Q128A13BSF40F
• Description: IC SRL FLASH 128MB NMX 16-SOIC
• Manufacturer: NUMONYX
• Series: Forté™r

Specifications of N25Q128A13BSF40F

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 128M (16M x 8)
• Speed: 108MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

XIP Operations
10.4
136/157
In Dual and Single I/O XIP mode, in presence of the RESET pin enabled (in devices with a
dedicated part number), a low pulse on that pin resets the XIP protocol as defined by the
Volatile Configuration Register, reporting the memory at the state of last power up, as
defined by the Non Volatile Configuration Register. In Quad I/O XiP modes, it is possible to
reset the memory (for devices with a dedicated part number) only when the device is
deselected. See
XIP Memory reset after a controller reset
If during the application life the system controller is reset during operation, and the device
features the RESET functionality (in devices with a dedicated part number), and the feature
has not been disabled, after the controller resets, the memory returns to POR state and
there is no issue. See
In all the other cases, it is possible to exit the memory from the XIP mode by sending the
following rescue sequence at the first chip selection after a system reset:
DQ0= '1' for:
7 clock cycles within S low (S becomes high before 8th clock cycle)
+ 13 clock cycles within S low (S becomes high before 14th clock cycle)
+ 25 clock cycles within S low (S becomes high before 26th clock cycle)
The global effect is only to exit from XIP without any other reset.
Section 16: Ordering
Section 16: Ordering
information.
Micron Technology, Inc., reserves the right to change products or specifications without notice.
information.
©2010 Micron Technology, Inc. All rights reserved.
N25Q128 - 3 V