HD6417750RF200DV Renesas Electronics America, HD6417750RF200DV Datasheet - Page 659

• Manufacturer Part Number: HD6417750RF200DV
• Description: MPU 1.5/3.3V 0K I-TEMP PB-FREE 2
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417750RF200DV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 28
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.35 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Section 14 Direct Memory Access Controller (DMAC)
When a DMA transfer corresponding to a transfer request signal from an on-chip peripheral
module shown in table 14.5 is carried out, the signal is discontinued automatically. This occurs
every transfer in cycle steal mode, and in the last transfer in burst mode.
14.3.3
Channel Priorities
If the DMAC receives simultaneous transfer requests on two or more channels, it selects a channel
according to a predetermined priority system, either in a fixed mode or round robin mode. The
mode is selected with priority bits PR1 and PR0 in the DMA operation register (DMAOR).
Fixed Mode: In this mode, the relative channel priorities remain fixed. The following priority
orders are available in fixed mode:
• CH0 > CH1 > CH2 > CH3
• CH0 > CH2 > CH3 > CH1
• CH2 > CH0 > CH1 > CH3
The priority order is selected with bits PR1 and PR0 in DMAOR.
Round Robin Mode: In round robin mode, each time the transfer of one transfer unit (byte, word,
longword, quadword, or 32 bytes) ends on a given channel, that channel is assigned the lowest
priority level. This is illustrated in figure 14.3. The order of priority in round robin mode
immediately after a reset is CH0 > CH1 > CH2 > CH3.
Note: In round robin mode, if no transfer request is accepted for any channel during DMA
transfer, the priority order becomes CH0 > CH1 > CH2 > CH3.
Rev.7.00 Oct. 10, 2008 Page 573 of 1074
REJ09B0366-0700