PSB21150FV14XT Lantiq, PSB21150FV14XT Datasheet - Page 219

• Manufacturer Part Number: PSB21150FV14XT
• Manufacturer: Lantiq

Specifications of PSB21150FV14XT

• Number Of Line Interfaces: 1
• Control Interface: HDLC
• Lead Free Status / Rohs Status: Compliant

ISTA
4.5
4.5.1
Value after reset: 00
For all interrupts in the ISTA register following logical states are applied:
0: Interrupt is not acitvated
1: Interrupt is acitvated
ICA, ICB, ICD ... HDLC Interrupt from B-channel A, B or D-channel
An interrupt originated from the HDLC controllers of B-channel A, B or of the D-channel
has been recognized.
ST ... Synchronous Transfer
This interrupt is generated to enable the microcontroller to lock on to the IOM timing for
synchronous transfers. The source can be read from the STI register.
CIC ... C/I Channel Change
A change in C/I channel 0 or C/I channel 1 has been recognized. The actual value can
be read from CIR0 or CIR1.
AUX ... Auxiliary Interrupts
Signals an interrupt generated from external awake (pin EAW), watchdog timer overflow,
timer1, timer2 or from one of the interrupt input pins (INT0, INT1). The source can be
read from the auxiliary interrupt register AUXI.
TRAN ... Transceiver Interrupt
An interrupt originated in the transceiver interrupt status register (ISTATR) has been
recognized.
MOS ... MONITOR Status
A change in the MONITOR Status Register (MOSR) has occured.
Note: A read of the ISTA register clears none of the interrupts. They are only cleared by
Data Sheet
reading the corresponding status register.
7
Interrupt and General Configuration
ISTA - Interrupt Status Register
ICA
H
ICB
ST
CIC
219
AUX
TRAN MOS
Detailed Register Description
0
ICD
PSB/PSF 21150
2003-01-30
IPAC-X
RD (60)