DF2268FA13V Renesas Electronics America, DF2268FA13V Datasheet - Page 376

• Manufacturer Part Number: DF2268FA13V
• Description: IC H8S/2268 MCU FLASH 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2268FA13V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 13MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: LCD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 13 Serial Communication Interface (SCI)
Notes: 1. Only a 0 can be written to this bit, to clear the flag.
Rev. 5.00 Sep. 01, 2009 Page 324 of 656
REJ09B0071-0500
2
Bit
1
0
2. This bit is cleared by DTC only when DISEL = 0 with the transfer counter other than 0.
Bit Name
TEND
MPB
MPBT
Initial
Value
1
0
0
R/W
R
R
R/W
Description
Transmit End
This bit is set to 1 when no error signal has been sent
back from the receiving end and the next transmit data is
ready to be transferred to TDR.
[Setting conditions]
•
•
The timing of bit setting differs according to the register
setting as follows:
When GM = 0 and BLK = 0, 12.5 etu after transmission
starts
When GM = 0 and BLK = 1, 11.5 etu after transmission
starts
When GM = 1 and BLK = 0, 11.0 etu after transmission
starts
When GM = 1 and BLK = 1, 11.0 etu after transmission
starts
[Clearing conditions]
•
•
Multiprocessor Bit
This bit is not used in Smart Card interface mode.
Multiprocessor Bit Transfer
Write 0 to this bit in Smart Card interface mode.
When the TE bit in SCR is 0 and the ERS bit is also 0
When the ERS bit is 0 and the TDRE bit is 1 after the
specified interval following transmission of 1-byte
data.
When 0 is written to TDRE after reading TDRE = 1
When the DTC *
transfers transmission data to TDR (H8S/2268 Group
only)
2
is activated by a TXI interrupt and