HD64F3337YCP16 Renesas Electronics America, HD64F3337YCP16 Datasheet - Page 200

• Manufacturer Part Number: HD64F3337YCP16
• Description: IC H8 MCU FLASH 60K 84PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• Package: 84PLCC
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 74
• Interface Type: HIF/I2C/SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit 2—Output Compare Flag B (OCFB): This status flag is set to 1 when the FRC value
matches the OCRB value. This flag must be cleared by software. It is set by hardware, however,
and cannot be set by software.
Bit 2: OCFB
0
1
Bit 1—Timer Overflow Flag (OVF): This status flag is set to 1 when FRC overflows (changes
from H'FFFF to H'0000). This flag must be cleared by software. It is set by hardware, however,
and cannot be set by software.
Bit 1: OVF
0
1
Bit 0—Counter Clear A (CCLRA): This bit selects whether to clear FRC at compare-match A
(when the FRC and OCRA values match).
Bit 0: CCLRA
0
1
8.2.6
TCR is an 8-bit readable/writable register that selects the rising or falling edge of the input capture
signals, enables the input capture buffer mode, and selects the FRC clock source.
TCR is initialized to H'00 by a reset and in the standby modes.
168
Bit
Initial value
Read/Write
Timer Control Register (TCR)
IEDGA
R/W
Description
To clear OCFB, the CPU must read OCFB after it has been set to 1, then write
a 0 in this bit.
This bit is set to 1 when FRC = OCRB.
Description
To clear OVF, the CPU must read OVF after it has been set to 1, then write a 0
in this bit.
This bit is set to 1 when FRC changes from H'FFFF to H'0000.
Description
The FRC is not cleared.
The FRC is cleared at compare-match A.
7
0
IEDGB
R/W
6
0
IEDGC
R/W
5
0
IEDGD
R/W
4
0
BUFEA
R/W
3
0
BUFEB
R/W
2
0
CKS1
R/W
1
0
(Initial value)
(Initial value)
(Initial value)
CKS0
R/W
0
0