HD64F3337YCP16 Renesas Electronics America, HD64F3337YCP16 Datasheet - Page 261

• Manufacturer Part Number: HD64F3337YCP16
• Description: IC H8 MCU FLASH 60K 84PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• Package: 84PLCC
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 74
• Interface Type: HIF/I2C/SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

11.3
11.3.1
The watchdog timer function begins operating when software sets the WT/IT and TME bits to 1 in
TCSR. Thereafter, software should periodically rewrite the contents of the timer counter (normally
by writing H'00) to prevent the count from overflowing. If a program crash allows the timer count
to overflow, the entire chip is reset for 518 system clocks (518 ø), or an NMI interrupt is
requested. Figure 11.3 shows the operation.
NMI requests from the watchdog timer have the same vector as NMI requests from the NMI pin.
Avoid simultaneous handling of watchdog timer NMI requests and NMI requests from pin NMI.
A reset from the watchdog timer has the same vector as an external reset from the RES pin. The
reset source can be determined by the XRST bit in SYSCR.
TCNT count
H'FF
H'00
Operation
Watchdog Timer Mode
WT/IT = 1
TME = 1
Figure 11.3 Operation in Watchdog Timer Mode
H'00 written
to TCNT
OVF = 1
WDT overflow
Reset
518 ø
WT/IT = 1
TME = 1
H'00 written
to TCNT
Time t
229