UPD70F3736GK-GAK-AX Renesas Electronics America, UPD70F3736GK-GAK-AX Datasheet - Page 486

• Manufacturer Part Number: UPD70F3736GK-GAK-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3736GK-GAK-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 66
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Program Memory Size: 256KB (256K x 8)
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

486
CBnTMS
Note These bits can only be rewritten when the CBnPWR bit = 0. However, the CBnPWR
CBnDIR
[In single transfer mode]
[In continuous transfer mode]
The reception complete interrupt (INTCBnR) occurs when communication is
complete.
Even if transmission is enabled (CBnTXE bit = 1), the transmission enable interrupt
If the next transmit data is written during communication (CBnSTR.CBnTSF bit =
1), it is ignored and the next communication is not started. Also, if reception-only
communication is set (CBnTXE bit = 0, CBnRXE bit = 1), the next communication
is not started even if the receive data is read during communication (CBnSTR.
CBnTSF bit = 1).
The continuous transmission is enabled by writing the next transmit data during
communication (CBnSTR.CBnTSF bit = 1). Writing the next transmission data is
enabled after a transmission enable interrupt (INTCBnT) occurrence.
If reception-only communication is set (CBnTXE bit = 0, CBnRXE bit = 1) in the
continuous transfer mode, the next reception is started continuously after a
reception complete interrupt (INTCBnR) regardless of the read operation of the
CBnRX register.
Therefore, read immediately the receive data from the CBnRX register. If this read
operation is delayed, an overrun error (CBnOVE bit = 1) occurs.
(INTCBnT) does not occur.
0
1
0
1
Note
Note
can be set to 1 at the same time as these bits are rewritten.
CHAPTER 16 3-WIRE VARIABLE-LENGTH SERIAL I/O (CSIB)
Single transfer mode
Continuous transfer mode
MSB-first transfer
LSB-first transfer
Preliminary User’s Manual U18952EJ1V0UD
Specification of transfer direction mode (MSB/LSB)
Transfer mode specification
(2/3)