CV500ETN01 Omron, CV500ETN01 Datasheet - Page 126

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Using the ETN11-
compatible Mode
IP Addresses in FINS Communications
1,2,3...
Note
For Ethernet Unit with unit version 1.4 or later, operating specifications can be
made compatible with the CS1W-ETN11/CJ1W-ETN11 for all methods (auto-
matic generation (dynamic), I/O address table, or combined). (Dynamic
changes, however, are prohibited for the destination IP address in ETN11-
compatible mode.) While in ETN11-compatible mode, the following operations
will be performed the same as they are for the CS1W-ETN11/CJ1W-ETN11
for FINS/UDP command data sent from a UDP port number other than the
local FINS/UDP port number (default: 9600) set in the Unit Setup Tab Win-
dow.
The ETN11-compatible mode is set as follows using the Web function setting
window.
1. Connect to the Ethernet Unit from a Web browser and select Settings - 1.
2. Select ETN11 compatible mode from the FINS/UDP option in the System
(1) If the ETN11-compatible mode is used, internal method tables will not be
(2) The ETN11-compatible mode is not used for normal applications and
• If the command data is for the Ethernet Unit, a FINS response will be sent
• If the command data is for any other Unit, such as the CPU Unit, a FINS
to the source UDP port number.
response will be sent to the UDP port number set as the FINS/UDP port
number.
IP address and Protocols - System. The System Format will be displayed.
Format, click the Set Button, click the Regist Button, and then turn the pow-
er supply OFF and ON or restart the Unit using a software restart.
changed when the power supply is turned OFF and ON or software resets
are executed. This provides protection from access via FINS/UDP from
computers that dynamically change their IP address.
should not be used in most cases.
Section 5-2
101