CV500ETN01 Omron, CV500ETN01 Datasheet - Page 66

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2-7
Unit Setup Procedure
Unit Setup Procedure
1,2,3...
Use the CX-Programmer (Ver. 3.20 or higher) for the Ethernet Unit Setup, and
follow the procedure described below. Some functions added with unit version
1.3 require CX-Programmer version 5.0 or higher for setting.
1. Connect the CX-Programmer online.
2. Use the mouse to select I/O table in the Project Window. Either double-
The CX-Programmer can be connected to the PLC in either of the following
ways:
a. Connect the personal computer to the PLC by serial cable, through ei-
b. Connect the personal computer to the PLC by Ethernet.
When Ethernet Unit is registered in the I/O tables in the CPU Unit, the
Ethernet
(192.168.250.node_number). This default IP address can be used initially
to connect online.
For details on connecting the CX-Programmer to the PLC by serial cable,
refer to the CX-Programmer operation manual.
For details on connecting the CX-Programmer to the PLC by Ethernet, re-
fer to 6-5 Using FINS Applications.
click or right-click to display the Properties Menu, and select Open. The
I/O Table Window will then be displayed.
ther a peripheral port or RS-232C port.
Unit
will
operate
using
the
default
Section 2-7
IP
address
41