CV500ETN01 Omron, CV500ETN01 Datasheet - Page 174

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Communicating between OMRON PLCs
Note
CPU Bus Unit Service Processing Time (Remote Node)
The processing time will be as follows, depending on the CPU processing
mode settings at the CPU Unit.
For details, refer to the CPU Unit operation manual.
The actual operating environment can cause transmission delays larger than
those calculated with the methods given here. Among the causes of longer
delays are the following: traffic on the network, window sizes at network
nodes, traffic through the Ethernet Unit (e.g., socket servicing, FTP server
communications, etc.), and the system configuration.
Example Calculations
The following example shows calculations for sending 256 words between two
PLC nodes using SEND(090). Calculations are shown in the following table.
Conditions
Local node CPU cycle time: 10 ms
Local node CPU execution mode: Normal
Local node CPU uniform peripheral servicing time: Default (4%)
Remote node CPU cycle time: 5 ms
Remote node CPU execution mode: Normal
Remote node CPU peripheral servicing time: Default (4%)
Baud rate: 100Base-TX
Normal Mode
Priority peripheral servicing
Parallel processing with syn-
chronous memory access
Parallel processing with
asynchronous memory
access
CPU Bus Unit service cycle (local node)
CPU Bus Unit service processing time
(local node)
Transmission processing time
Transmission delay
Reception processing time
CPU Bus Unit service cycle (remote node)
CPU Bus Unit service processing time
(remote node)
Total
CPU processing mode
settings
Item
Ethernet Unit is given
Set peripheral servicing time
Default: 4% of CPU Unit cycle time
priority.
Ethernet Unit is not
given priority.
Set peripheral servicing time
(Default: 4% of CPU Unit cycle time)
1 ms max.
Processing time considerations
10 ms
0.4 ms
256
256
0.3 ms
256
5 ms
0.2 ms
10 + 0.4 + 1.1 + 0.3 + 1.5 + 5 + 0.2 =
18.5 ms
0.002 + 0.550 = 1.062
0.0013 + 0.0118 = 0.3446
0.003 + 0.704 = 1.472
Time slice peripheral servicing
execution time
Set peripheral servicing time
(Default: 4% of CPU Unit cycle
time)
Calculation
Section 6-6
1.1 ms
1.5 ms
149