CV500ETN01 Omron, CV500ETN01 Datasheet - Page 23

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

xxiv
Application Precautions
!Caution Failure to abide by the following precautions could lead to faulty operation of
the Ethernet Unit or the system, or could damage the Ethernet Unit. Always
heed these precautions.
• Always turn OFF the power supply to the CPU Unit, Slaves, and Commu-
• Fail-safe measures must be taken by the customer to ensure safety in the
• Interlock circuits, limit circuits, and similar safety measures in external cir-
• Always use the power supply voltages specified in the operation manuals.
• Take appropriate measures to ensure that the specified power with the
• Install external breakers and take other safety measures against short-cir-
• Do not install the Unit near devices that generate strong high-frequency
• Do not drop the Unit or subject it to excessive vibration or shock.
• Make sure that all the Backplane mounting screws, terminal block screws,
• Leave the label attached to the Unit when wiring. Removing the label may
• Remove the label after the completion of wiring to ensure proper heat dis-
• Use crimp terminals for wiring. Do not connect bare stranded wires
• Double-check all wiring and switch settings before turning ON the power
• Wire all connections correctly.
• Mount Units only after checking terminal blocks and connectors com-
• Make sure that the terminal blocks, expansion cables, and other items
• When transporting the Unit, use special packing boxes and protect it from
nications Units before attempting any of the following. Not turning OFF
the power supply may result in malfunction or electric shock.
event of incorrect, missing, or abnormal signals caused by broken signal
lines, momentary power interruptions, or other causes.
cuits (i.e., not in the Programmable Controller) must be provided by the
customer.
An incorrect voltage may result in malfunction or burning.
rated voltage and frequency is supplied. Be particularly careful in places
where the power supply is unstable. An incorrect power supply may result
in malfunction.
cuiting in external wiring. Insufficient safety measures against short-cir-
cuiting may result in burning.
noise.
and cable connector screws are tightened to the torque specified in the
relevant manuals. Incorrect tightening torque may result in malfunction.
result in malfunction if foreign matter enters the Unit.
sipation. Leaving the label attached may result in malfunction.
directly to terminals. Connection of bare stranded wires may result in
burning.
supply. Incorrect wiring may result in burning.
pletely.
with locking devices are locked in place.
being exposed to excessive vibration or impacts during transportation.
• Mounting or dismounting I/O Units, CPU Units, Memory Packs, or
• Assembling the Units.
• Setting DIP switches or rotary switches.
• Connecting cables or wiring the system.
Master Units.
5