CV500ETN01 Omron, CV500ETN01 Datasheet - Page 270

• Manufacturer Part Number: CV500ETN01
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500ETN01

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Ethernet Unit Web Function
Status Monitor
Web Function Password
To prevent unauthorized access to the Ethernet Unit from a Web browser, password entry is required to enable
display and setting of the parameters. Even if the password has not been set, the default password “ETHER-
NET” must be entered. To change this password, set a new password in the HTTP Tab of the CX-Program-
mer’s Unit Setup, or use the Web function and select Settings - IP address and Protocols - HTTP.
Note 1. Setting a new Web function password as soon as possible is recommended to prevent unauthorized
Using the Web Function (Setting Password)
The Ethernet Unit’s Web window is displayed by accessing the following URL from the Web browser.
URL: http://(Ethernet Unit’s IP address)/0
Use the following procedure to set the Unit’s system settings (HTTP password setting in this example) using
Internet Explorer version 6.0 and the Ethernet Unit’s Web function.
Receive Mail
Status View
Unit information
Unit status
Protocol status
IP status
ICMP status
TCP status
UDP status
Memory status
Socket status
Fins status
Mail log
Error log
Send mail status
Menu item
Menu item
2. The Web function can also be disabled by setting in the Web function option.
access.
Mail Address Protection Setting
Attached File Enable Settings
Command Enable Setting
---
FINS(0501): CONTROLLER DATA READ
FINS(0601): CONTROLLER STATUS READ
---
FINS(2762): PROTOCOL STATUS READ, IP status
FINS(2762): PROTOCOL STATUS READ, ICMP status
FINS(2762): PROTOCOL STATUS READ, TCP status
FINS(2762): PROTOCOL STATUS READ, UDP status
FINS(2763): MEMORY STATUS READ
FINS(2764): SOCKET STATUS READ
Ethernet Unit’s internal node table
RECEIVE MAIL: READ MAIL LOG
FINS(2102): READ ERROR LOG
Mail send status 1 to 8
Parameter item
Corresponding CX-Programmer function
Unit Setup window- Receive Mail Tab
Unit Setup window- Receive Mail Tab - Protect using mail address
Unit Setup window- Receive Mail Tab - Receive file with specified extension only
Unit Setup window- Receive Mail Tab - Receive specified commands only
Corresponding CX-Programmer function
Appendix G
245