56-U04-E01 Spectrum Control, 56-U04-E01 Datasheet - Page 147

• Manufacturer Part Number: 56-U04-E01
• Description: USB CONNECTOR, RECEPTACLE, 4POS, THD
• Manufacturer: Spectrum Control
• Series: USB-Er

Specifications of 56-U04-E01

• Connector Type: USB
• No. Of Contacts: 4
• Contact Termination: Right Angle Through Hole
• Connector Mounting: PCB
• Gender: Receptacle
• Contact Plating: Gold
• Product: USB Type A Connectors
• Standard: USB
• Number Of Ports: 1
• Features: Spectrum USB Filtered Connectors TYPE A R/A USB .05pF 5A 10VDC
• Insulation Resistance: 10 MOhms
• Mounting Angle: Right
• Number Of Positions / Contacts: 4
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

147
Hi-Density Filtered Adapter
for Telecommunications
Within the telecommunications industry, it has been
standard practice to use an adapter (male/female) type
of EMI filtered connector as the interface between the
switching system electronics and the premise wiring.
These filtered adapters provide effective containment
of EMI compared to either D-subminiature or 50-position
“ribbon” contact type connectors.
development of a new generation of filtered adapters.
Special Requirements
s
s
s
s
s
Spectrum Control, in response to these unique
requirements of the telecommunication industry,
has developed a new Hi-Density filtered adapter.
Features
s
s
s
s
s
SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: [phone] • Fax: [phone] • Web site: www.spectrumcontrol.com
SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: [phone] • Fax: [phone]
Higher density wiring
The need for more contacts, usually
a multiple of 16
Higher reliability contact geometries
Bellcore TR-NWT-001089 requirements
s
s
Improved flammable resistant plastic insulators
New ceramic technology and filter element
construction to accept higher voltages
Improved reliability compared to “ribbon”
type connectors
Integral ground plane and one-piece diecast
housing for the highest level of EMI integrity
More contacts/wires per square inch of panel space
through Hi-Density arrangements
64 contact positions standard, with 78 positions
available by request in any filter combination
The following several factors have mandated the
1000 volts AC withstand for one minute
2500 volts spike surge testing
Mechanical Specifications
Shell . . . . . . . . . . . . Zinc diecast, nickel plated
Insulators . . . . . . . . Thermoplastic, UL94V-0
Contacts . . . . . . . . . One-piece, screw machined
Ground Plane . . . . . Brass, solder plated
Grounding
Springs . . . . . . . . . . Beryllium copper, tin plated per
Operating
Temperature. . . . . . . -55°C to +125°C
Capacitor. . . . . . . . . High performance ceramic
Electrical Specifications
Rated Voltage. . . . . . 100 VDC
Current
Rating . . . . . . . . . . . 3 Amps
DC Resistance . . . . . 15 milliohm max.
Dielectric
Withstanding
Voltage . . . . . . . . . . 1000 VRMS (FCC Part 68 test)
Capacitance . . . . . . . 1000 pF, ±25%
Voltage Surge . . . . . meets 2500 volts surge (10/1000)
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
150 µ inches (3.81 µm) min.
Copper alloy, contact area plated
50 µ inches (1.27 µm) gold
over 50 µ inches (1.27 µm) nickel
MIL-T-10727
feed-thru utilizing ultra low
ESR design
(See Wave form figure on
next page)