PSB21373HV1.1XT Infineon Technologies, PSB21373HV1.1XT Datasheet - Page 122

• Manufacturer Part Number: PSB21373HV1.1XT
• Manufacturer: Infineon Technologies

Specifications of PSB21373HV1.1XT

• Lead Free Status / RoHS Status: Compliant

Figure 63
Speakerphone Signal Flow Graph of the SCOUT-DX
4.4.1
The Attenuation Control unit controls the attenuation stages GHX of the transmit and
GHR of the receive directions respectively. The programmable loss is switched either
completely to a single path or, in the “IDLE” mode, is halved to each direction.
In addition, attenuation is also influenced by the Automatic Gain Control stages (AGCX
and AGCR). In order to keep the total loop gain always constant, the sweep range (of
ATT) is automatically enlarged with high-gain amplification of the AGCs while it will be
accordingly reduced with low-gain.
Changing from one speakerphone mode into another one depends on the
determinations of one comparator plus the corresponding speech detector. Hence
attenuation is influenced by the current and past speech activities. Also rate of change
varies: changing from “transmit mode” or “receive mode” to “idle mode” is programmable
by the rate factor DS. Direct changes from “transmit mode” to “receive mode” or vice-
versa and changes from “idle mode” to “transmit mode” or “receive mode” can be
programmed via the factor SW in a large range.
Data Sheet
Signal-Processing
Analog Front End
Signal-Processing
Analog Front End
&
&
Attenuation Control Unit
SX
SR
SCAE
SD
AGCX
Attenuation
GR
Control
122
GHX
GHR
SD
AGCR
SCLE
SR´
SX´
PSB 21373
COMP
EXP
2002-05-13
PCM
PCM