MC68HC705X32CFU Freescale Semiconductor, MC68HC705X32CFU Datasheet - Page 100

• Manufacturer Part Number: MC68HC705X32CFU
• Manufacturer: Freescale Semiconductor

Specifications of MC68HC705X32CFU

• Cpu Family: HC05
• Device Core Size: 8b
• Frequency (max): 4MHz
• Interface Type: SCI
• Program Memory Type: EPROM
• Program Memory Size: 32KB
• Total Internal Ram Size: 528Byte
• # I/os (max): 32
• Number Of Timers - General Purpose: 1
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• On-chip Adc: 8-chx8-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 64
• Package Type: PQFP
• Lead Free Status / Rohs Status: Supplier Unconfirmed

6
6.6
When the MCU enters STOP mode, the timer counter stops counting and remains at that particular
count value until STOP mode is exited by an interrupt. If STOP mode is exited by power-on or
external reset, the counter is forced to $FFFC but if it is exited by external interrupt (IRQ) then the
counter resumes from its stopped value.
Another feature of the programmable timer is that if at least one valid input capture edge occurs at
one of the TCAP pins while in STOP mode, the corresponding input capture detect circuitry is
armed. This action does not wake the MCU or set any timer flags, but when the MCU does wake-up
there will be an active input capture flag (and data) from that first valid edge which occurred during
STOP mode.
If STOP mode is exited by an external reset then no such input capture flag or data action takes
place even if there was a valid input capture edge (at one of the TCAP pins) during STOP mode.
6.7
The timer system is not affected by WAIT mode and continues normal operation. Any valid timer
interrupt will wake-up the system.
6.8
The relationships between the internal clock signals, the counter contents and the status of the
flag bits are shown in the following figures. It should be noted that the signals labelled ‘internal’
(processor clock, timer clocks and reset) are not available to the user.
Timer during STOP mode
Timer during WAIT mode
Timer state diagrams
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
PROGRAMMABLE TIMER
MC68HC05X16
Rev. 1