MC68HC705X32CFU Freescale Semiconductor, MC68HC705X32CFU Datasheet - Page 73

• Manufacturer Part Number: MC68HC705X32CFU
• Manufacturer: Freescale Semiconductor

Specifications of MC68HC705X32CFU

• Cpu Family: HC05
• Device Core Size: 8b
• Frequency (max): 4MHz
• Interface Type: SCI
• Program Memory Type: EPROM
• Program Memory Size: 32KB
• Total Internal Ram Size: 528Byte
• # I/os (max): 32
• Number Of Timers - General Purpose: 1
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• On-chip Adc: 8-chx8-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 64
• Package Type: PQFP
• Lead Free Status / Rohs Status: Supplier Unconfirmed

TCS — Transmission complete status
This bit is cleared by the MCAN when TR becomes set. When TCS is set it indicates that the last
requested transmission was successfully completed. If, after TCS is cleared, but before
transmission begins, an abort transmission command is issued then the transmit buffer will be
released and TCS will remain clear. TCS will then only be set after a further transmission is both
requested and successfully completed.
TBA — Transmit buffer access
When clear, the transmit buffer is locked and cannot be accessed by the CPU. This indicates that
either a message is being transmitted, or is awaiting transmission. If the CPU writes to the transmit
buffer while it is locked, then the bytes will be lost without this being signalled.
DO — Data overrun
This bit is set when both receive buffers are full and there is a further message to be stored. In this
case the new message is dropped, but the internal logic maintains the correct protocol. The MCAN
does not receive the message, but no warning is sent to the transmitting node. The MCAN clears
DO when the CPU sets the COS bit in the CCOM register.
Note that data overrun can also be caused by a transmission, since the MCAN will temporarily
store an outgoing frame in a receive buffer in case arbitration is lost during transmission.
RBS — Receive buffer status
This bit is set by the MCAN when a new message is available. When clear this indicates that no
message has become available since the last RRB command. The bit is cleared when RRB is set.
However, if the second receive buffer already contains a message, then control of that buffer is
given to the CPU and RBS is immediately set again. The first receive buffer is then available for
the next incoming message from the MCAN.
MC68HC05X16
1 (set)
0 (clear) –
1 (set)
0 (clear) –
1 (set)
0 (clear) –
1 (set)
0 (clear) –
Freescale Semiconductor, Inc.
–
–
–
–
For More Information On This Product,
message to be stored.
Complete – Last requested transmission successfully completed.
Incomplete – Last requested transmission not complete.
Released – The transmit buffer may be written to by the CPU.
Locked – The CPU cannot access the transmit buffer.
Overrun – Both receive buffers were full and there was another
Normal operation.
Full – A new message is available for the CPU to read.
Empty – No new message is available.
MOTOROLA CAN MODULE (MCAN)
Go to: www.freescale.com
5-11
5