C8051F502-IMR Silicon Laboratories Inc, C8051F502-IMR Datasheet - Page 132

• Manufacturer Part Number: C8051F502-IMR
• Description: MCU 8-Bit C8051F50x 8051 CISC 64KB Flash 2.5V/3.3V/5V 32-Pin QFN EP T/R
• Manufacturer: Silicon Laboratories Inc

Specifications of C8051F502-IMR

• Package: 32QFN EP
• Device Core: 8051
• Family Name: C8051F50x
• Maximum Speed: 50 MHz
• Ram Size: 4.25 KB
• Program Memory Size: 64 KB
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 8 Bit
• Program Memory Type: Flash
• Number Of Programmable I/os: 25
• Interface Type: I2C/SPI/UART
• On-chip Adc: 32-chx12-bit
• Operating Temperature: -40 to 125 °C
• Number Of Timers: 4

C8051F50x/F51x
The level of Flash security depends on the Flash access method. The three Flash access methods that
can be restricted are reads, writes, and erases from the C2 debug interface, user firmware executing on
unlocked pages, and user firmware executing on locked pages. Table 15.1 summarizes the Flash security
features of the C8051F50x/F51x devices.
132
Read, Write or Erase unlocked pages
(except page with Lock Byte)
Read, Write or Erase locked pages
(except page with Lock Byte)
Read or Write page containing Lock Byte
(if no pages are locked)
Read or Write page containing Lock Byte
(if any page is locked)
Read contents of Lock Byte
(if no pages are locked)
Read contents of Lock Byte
(if any page is locked)
Erase page containing Lock Byte
(if no pages are locked)
Erase page containing Lock Byte—Unlock all
pages (if any page is locked)
Lock additional pages
(change 1s to 0s in the Lock Byte)
Unlock individual pages
(change 0s to 1s in the Lock Byte)
Read, Write or Erase Reserved Area
C2 Device Erase—Erases all Flash pages including the page containing the Lock Byte.
Flash Error Reset—Not permitted; Causes Flash Error Device Reset (FERROR bit in RSTSRC is '1' after
reset).
- All prohibited operations that are performed via the C2 interface are ignored (do not cause device reset).
- Locking any Flash page also locks the page containing the Lock Byte.
- Once written to, the Lock Byte cannot be modified except by performing a C2 Device Erase.
- If user code writes to the Lock Byte, the Lock does not take effect until the next device reset.
Action
Table 15.1. Flash Security Summary
Rev. 1.2
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Erase Only
C2 Debug
C2 Device
Permitted
Permitted
Permitted
Permitted
Interface
an unlocked page
Flash Error Reset
Flash Error Reset
Flash Error Reset
Flash Error Reset Flash Error Reset
Flash Error Reset Flash Error Reset
Flash Error Reset Flash Error Reset
Flash Error Reset Flash Error Reset
Flash Error Reset Flash Error Reset
User Firmware executing from:
Permitted
Permitted
Permitted
a locked page
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted