PEB2256E INFINEON [Infineon Technologies AG], PEB2256E Datasheet - Page 261

• Manufacturer Part Number: PEB2256E
• Description: E1/T1/J1 Framer and Line Interface Component for Long and Short Haul Applications
• Manufacturer: INFINEON [Infineon Technologies AG]

Global Configuration Register (Read/Write)
Value after reset: 00
GCR
VIS
SCI
SES
ECMC
PD
Data Sheet
VIS
7
Masked Interrupts Visible
0 =
1 =
Status Change Interrupt
0 =
1 =
Select External Second Timer
0 =
1 =
Error Counter Mode COFA
0 =
1 =
Power Down
Switches between power-up and power-down mode.
0 =
1 =
SCI
H
Masked interrupt status bits are not visible in registers ISR(5:0).
Masked interrupt status bits are visible in ISR(5:0), but they are
not visible in register GIS.
Interrupts are generated either on activation or deactivation of
the internal interrupt source.
The following interrupts are activated both on activation and
deactivation of the internal interrupt source:
ISR2.LOS, ISR2.AIS, ISR3.LMFA16
Internal second timer selected
External second timer selected
The S
counter CEC3L/H.
A Change of Frame or Multiframe Alignment COFA is detected
since the last resynchronization. The events are accumulated
in the error counter CEC3L.(1:0).
Multiframe periods received in the asynchronous state are
accumulated in the error counter CEC3L.7-2.
An overflow of each counter is disabled.
Power up
Power down
All outputs are driven inactive; multifunction ports are driven
high by the weak internal pullup device.
SES
a
6-bit error indications are accumulated in the error
ECMC
261
FALC56 V1.2
PD
E1 Registers
0
PEB 2256
2002-08-27
(46)