AM79C976 Advanced Micro Devices, AM79C976 Datasheet - Page 133
AM79C976
Manufacturer Part Number
AM79C976
Description
PCnet-PRO 10/100 Mbps PCI Ethernet Controller
Manufacturer
Advanced Micro Devices
Datasheet
1.AM79C976.pdf
(309 pages)
- Current page: 133 of 309
- Download datasheet (3Mb)
8/01/00
Bit
15
14
13
12
11
10
9
8
7
ASTRP_RCV
DXMTFCS
RCVALGN
DXMT2PD
LTINTEN
FCOLL
EMBA
Name
VAL1
VAL0
Value bit for byte 1. The value of this bit is written to any bits in the CMD2 register that correspond
to bits in the CMD2[14:8] bit map field that are set to 1.
Receive Packet Align. When set, this bit forces the data field of ISO 8802-3 (IEEE/ANSI 802.3)
packets to align to 0 MOD 4 address boundaries (i.e., DWord aligned addresses). It is important to
note that this feature will only function correctly if all receive buffer boundaries are DWord aligned
and all receive buffers have 0 MOD 4 lengths. In order to accomplish the data alignment, the
Am79C976 controller simply inserts two bytes of random data at the beginning of the receive
packet (i.e., before the ISO 8802-3 (IEEE/ANSI 802.3) destination address field). The MCNT field
reported to the receive descriptor will not include the extra two bytes.
This bit is an alias of CSR122, bit 0.
Auto Strip Receive. When set, ASTRP_RCV enables the automatic pad stripping feature. For any
receive frame whose length field has a value less than 46, the pad and FCS fields will be stripped
and not placed in the FIFO.
This bit is an alias of CSR4, bit 10.
Force Collision. This bit allows the collision logic to be tested. The Am79C976 controller must be
in internal loopback for FCOLL to be valid. If FCOLL = 1, a collision will be forced during loopback
transmission attempts, which will result in a Retry Error. If FCOLL = 0, the Force Collision logic will
be disabled.
This bit is an alias of CSR15, bit 4.
Enable Modified Back-off Algorithm (see Contention Resolution section in Media Access
Management section for more details). If EMBA is set, a modified back-off algorithm is
implemented.
This bit is an alias of CSR3, bit 3.
Disable Transmit Two Part Deferral (see Medium Allocation section in the Media Access
Management section for more details). If DXMT2PD is set, Transmit Two Part Deferral will be
disabled.
This bit is an alias of CSR3, bit 4.
Last Transmit Interrupt Enable. When this bit is set to 1, the LTINT bit in transmit descriptors can
be used to determine when transmit interrupts occur. The Transmit Interrupt (TINT) bit will be set
after a frame has been copied to the Transmit FIFO if the LTINT bit in the frame’s last transmit
descriptor is set. If the LTINT bit in the frame’s last descriptor is 0 TINT will not be set after the frame
has been copied to the Transmit FIFO.
This bit is an alias of CSR5, bit 14.
Disable Transmit CRC (FCS). When DXMTFCS is set to 0, the transmitter will generate and append
an FCS to the transmitted frame. When DXMTFCS is set to 1, no FCS is generated or sent with
the transmitted frame. DXMTFCS is overridden when ADD_FCS and ENP bits are set in the
transmit descriptor.
When the auto padding logic, which is enabled by the APAD_XMT bit (CMD2, bit6), adds padding
to a frame, a valid FCS field is appended to the frame, regardless of the state of DXMTFCS.
If DXMTFCS is set and ADD_FCS is clear for a particular frame, no FCS will be generated. If
ADD_FCS is set for a particular frame, the state of DXMTFCS is ignored and a FCS will be
appended on that frame by the transmit circuitry. See also the ADD_FCS bit in the transmit
descriptor.
This bit was called DTCR in the LANCE (Am7990) device.
This bit is an alias of CSR15, bit 3.
Value bit for byte 0. The value of this bit is written to any bits in the CMD2 register that correspond
to bits in the CMD2[6:0] bit map field that are set to 1.
P R E L I M I N A R Y
Am79C976
Description
133
Related parts for AM79C976
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Advanced Micro Devices [4,096-Bit (512x8) Bipolar PROM]
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
Advanced Micro Devices [4,096-Bit (512x8) Bipolar PROM]
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
Advanced Micro Devices [8 Megabit (512 K x 16-Bit) CMOS 3.0 Volt-only Burst Mode Flash Memory]
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
M41000001YAdvanced Micro Devices [32 Megabit (4 M x 8-Bit/2 M x 16-Bit) CMOS 3.0 Volt-only, Simultaneous Operation Flash Memory and 4 Mbit (512 K x 8-Bit/256 K x 16-Bit) Static RAM]
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
Advanced Burst Error Processor
Manufacturer:
Advanced Micro Devices
Part Number:
Description:
Serial interface adapter (SIA)
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
Universal interrupt controller
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
256 kilobit CMOS EPROM
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
2048 x 8 static RAM, 100ns
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
Three-State Octal Buffers
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
AM2966PCOctal Dynamic Memory Drivers with Three-State Outputs
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
Three-State Octal Buffers
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
Three-State Octal Buffers
Manufacturer:
Advanced Micro Devices
Datasheet:
Part Number:
Description:
TTL programmable array logic, 7ns
Manufacturer:
Advanced Micro Devices
Datasheet: